Loading ...
Loading ...
Loading ...
Problem solving guide
169
Problem Possible cause and remedy
A humming sound can
be heard during
operation and after
switching off the steam
oven.
This noise does not indicate incorrect operation or an
appliance fault. The noise is made by water being
pumped through the system.
After moving house, the
appliance no longer
switches from the
heating-up phase to the
cooking phase.
Altitude affects the boiling point of water. If you move
house, the appliance will need to be reset for the new
altitude if this differs from the old one by more than
300m.
To adjust the boiling temperature, you need to
descale the appliance (see “Cleaning and care –
Maintenance”).
During operation an
unusually large amount
of steam escapes or
steam escapes from
parts of the steam oven
where it does not
usually.
The door is not properly closed.
Close the door.
The door seal is not correctly fitted.
If necessary, press it in all the way round the door
to make sure it is fitted evenly.
The door seal is damaged, e.g. cracked.
Replace the door seal.
This can be ordered from Miele (see the end of this
booklet for contact details).
The oven lighting
doesn't come on.
The lamp needs to be replaced.
Call Miele to have the lamp replaced.
The control panel will
not open or close
automatically despite
touching the sensor
several times.
Something is obstructing the control panel.
Remove the obstruction.
The obstruction sensor is very sensitive, which means
the control panel sometimes doesn't open or close.
Open/Close the control panel manually (see end of
this section).
If the problem occurs again, contact Miele.
The Start at and Finish at
functions are not
available.
The temperature in the oven compartment is too high,
e.g. after a programme has finished.
Open the door and let the oven cool down.
These functions are not generally available in
maintenance programmes.
Loading ...
Loading ...
Loading ...