Loading ...
Loading ...
Loading ...
33
STACKED WASHER/DRYER MAINTENANCE INSTRUCTIONS
Maintenance instructions:
Clean lint screen before and after each cycle.
Removing accumulated lint:
From inside the dryer cabinet:
Lint should be removed every 2 years or more often,
depending on dryer usage. Cleaning should be done
by a qualified person.
From the exhaust vent:
Lint should be removed every 2 years, or more often,
depending on dryer usage.
Keep area around dryer clear and free from combustible
materials, gasoline and other flammable vapors and liquids.
Keep dryer area clear and free from items that would obstruct
the flow of combustion and ventilation air.
If dryer does not operate, check the following:
Electrical supply is connected.
Circuit breaker is not tripped or house fuse is not blown.
Door is closed. Listen closely to hear the door switch activate.
Control is set up properly and display shows cycle time.
Cycle selection button has been pushed firmly.
For gas dryers, check that gas supply shut-off valves are set
in open position.
Dryer
Always do the following to maintain washer freshness:
Use only HE (High Efficiency) detergent.
Leave the door slightly open after each cycle to allow for better
ventilation and drying of washer interior.
Clean the washer monthly using the Washer Maintenance
Procedure, using 2/3 cup (160 mL) of liquid chlorine bleach.
If the procedure does not sufficiently improve the washer
freshness, please evaluate your installation and usage
conditions for other causes.
Cleaning the exterior
Use a soft damp cloth or sponge to wipe up any spills.
Occasionally wipe the outside of your washer to keep it looking
new. Use mild soap and water. Do not use abrasive products.
Cleaning the dispenser drawer
The dispenser drawer is removable for easy cleaning.
1. Unlock the dispenser drawer for removal by inserting
a flat-blade screwdriver into the catch release. Remove
the dispenser drawer.
2. Remove the inserts (the siphon from the softener and bleach
compartments).
3. Wash the parts under running water.
NOTE: Do not wash components in the dishwasher.
4. Replace the inserts and return the dispenser to the drawer.
Water inlet hoses
Replace the inlet hoses after 5 years of use to reduce the risk of
hose failure. Periodically inspect and replace inlet hoses if bulges,
kinks, cuts, wear, or leaks are found.
When replacing your inlet hoses, record the date of replacement.
Contact your authorized Maytag
®
Commercial Laundry distributor. To locate your authorized Maytag
®
Commercial Laundry distributor,
or for web inquiries, visit www.MaytagCommercialLaundry.com.
You will need the washer/dryer model numbers and serial numbers. Both numbers can be found on the serial-rating plate located in the
dryer door well.
IF YOU NEED ASSISTANCE
Loading ...
Loading ...
Loading ...