Loading ...
Loading ...
Loading ...
30
REVERSING DRYER DOOR SWING (OPTIONAL)
Reverse Hinge
1. Use a small flat-blade screwdriver to remove two plug strips
from the inner door. Slide the head of the screwdriver under the
plugs, without scratching inner door surface, and lift up strip.
2. Remove the four screws that attach to inner door hinge.
3. Move hinge to other side. Reinstall four screws.
4. Reinstall plug strips on opposite side of the inner door.
5. Check for fingerprints on the glass. Clean if necessary.
Replace the Door Assembly
1. Place the inner door assembly inside the outer door assembly.
2. Reassemble the inner and outer door assemblies with
the six screws.
Reverse the strike
1. Use a small flat-blade screwdriver to remove plug strip from the
dryer door opening. Slide the head of the screwdriver under the
plugs, without scratching dryer surface, and lift up strip.
Loading ...
Loading ...
Loading ...