Loading ...
Loading ...
Loading ...
29
REVERSING DRYER DOOR SWING (OPTIONAL)
Remove the Door Assembly
1. Place a towel or soft cloth on top of dryer or work space
to avoid scratching of the surface.
2. Remove three of the four screws that hold the door hinge on the
front panel of the dryer. Partially loosen the remaining screw with
keyhole opening and lift the door off the screw.
3. Lay the door assembly on a previously prepared flat surface
with the inside (inner door assembly) facing up, and remove six
phillips-head screws to release outer door assembly from inner
door assembly.
NOTE: It is important that you remove only the six indicated screws.
4. Lift the inner door assembly off outer door assembly.
5. Remove four Phillips-head screws to release center insert from
outer door ring.
6. Lift and rotate center insert 180 degrees.
7. Reassemble the center insert and outer door ring with the
four screws
Loading ...
Loading ...
Loading ...