Loading ...
Loading ...
Loading ...
Page 8
Operating Instructions
Fig. 8-1
Fig. 8-2
Fig. 8-3
MIXING INGREDIENTS
Follow the capacity chart located on page 12 in this owner’s manual.
Overloading or not following this chart will damage the mixer and void the warranty.
IMPORTANT: Make sure the speed control dial is in the
off position.
1. Add the appropriate mixing ingredients into the bowl.
2. If desired, place the splash cover on top of the bowl and align the pins on the
guard with the holes on the rim of the bowl (see Fig. 8-1 and 8-2).
Note: In order for the SP5-Q Mixer to operate, the splash cover must be in place
and clicked into locked postion.
3. Lift completely up on the bowl lift lever until the bowl locks into position
(see Fig. 8-3).
4. Select the appropriate speed setting by rotating the speed selector knob
clockwise starting from 0. To increase mixer speed, continue turning the
selector button clockwise to desired speed.
Recommended speeds while mixing:
Position Speed Attachment Product Type/Ingredient
1 (stir) All Start to incorporate ingredients
2 (low) Spiral Heavy: mixing pizza, bread, pasta,
stufng and donut doughs, wafe/cake
batter, mashing potatoes, etc.
3-7 (medium) Beater Medium: 2nd stage of mixing for donut
dough, etc.
8-10 (high) Whip Light: whipping cream, egg whites,
meringue, mousse, pancake mix, sponge
cakes, etc.
IMPORTANT: When mixing product always follow the recommended
agitator and speed setting according to the capacity chart located on page 12 of
this manual.
Always STOP the mixer BEFORE changing or tting accessories! Failure to do so
may cause harm to the operator; it may also damage the gears or other parts and
WILL void the warranty!
5. During the mixing process, additional ingredients can be added to the mixture using the food chute located on
the splash cover.
6. To turn off the mixer, turn the variable speed control counterclockwise until the dial is aligned with the selector
notch to the zero “0” position and the mixer turns off.
NOTE: If the mixer shuts off during operation, return the speed control dial back to the zero “0” position.
NOTE: The mixer is equipped with a manual motor reset on the back column. Reduce the batch size and wait
approximately ve minutes, press the reset button and then continue mixing.
Loading ...
Loading ...
Loading ...