Loading ...
Loading ...
Loading ...
Page 7
Operating Instructions
Fig. 7-1
Fig. 7-2
Fig. 7-3
Fig. 7-4 Fig. 7-5
TO AVOID SERIOUS PERSONAL INJURY:
• DO NOT operate the mixer before reading the instruction manual rst.
• ALWAYS disconnect or unplug electrical power before cleaning, servicing or adjusting any parts or
attachments.
• NEVER bypass, alter, modify or attach any unauthorized parts to this equipment.
Doing so may create hazards and will void warranty.
• NEVER operate mixer with a damaged power cord or plug.
• ALWAYS keep hands, hair and clothing away from moving parts.
NOTE: Wash all attachments and bowl prior to use.
ATTACHING THE BOWL TO THE MIXER
NOTE: Install the bowl BEFORE attaching the agitators.
1. Lower the bowl by pushing the bowl lift lever backwards and down to its resting position.
2. Lift the bowl by the bowl handle and
a. slowly position the locking pin (located on the rear of the bowl) into the hole in the
middle rear of the cradle (see Fig. 7-1).
b. lower the bowl onto the pins located on either side of the bowl cradle.
3. Once the bowl is positioned on the cradle, secure the bowl by pulling both bowl clamps
forward until the bowl is locked tight (see Fig. 7-2).
ATTACHING THE AGITATOR TO THE MIXER (i.e., Beater, Hook, Whip)
NOTE: It is easier to install the agitator prior to adding the ingredients into the bowl.
1. The bowl must be installed, lowered into position and the splash cover should be
removed (see Fig. 7-3).
2. Slide the agitator slowly upwards onto the planetary shaft tting the shaft pin through the
slot in the agitator (see Fig. 7-4).
3. Rotate the agitator clockwise to secure it onto the planetary shaft (see g. 7-5).
NOTE: After cleaning, make sure to wipe the shaft with Vaseline or vegetable oil for
better lubrication and to prevent breakdown of shaft and its parts. DO NOT use any
lubricant that can be harmful to humans to ingest as some lubricants may come in
contact with some mixing processes.
Loading ...
Loading ...
Loading ...