Loading ...
Loading ...
Loading ...
EN 11
Switching on and power setting
1. Place the pan in the middle of a cooking zone.
2. Press the On/Off button (01).
A single beep sounds.
3. Press the display (A) of the desired cooking zone.
A single beep sounds. The dot directly below the corresponding
display will light up and is assigned to the visual slide control.
4. Slide your finger over the slide control (02) to set the desired
setting. The cooking zone starts automatically at the level that has
been set.
5. Set a higher or lower power by sliding with your finger over the
slide control.
The cooking zones have 9 levels and a boost level (P).
Pan detection
If the hob doesn’t detect a pan with iron content after a power level has
been set, the display will show the symbol ‘U’ and the cooking area will
remain cold. If no pan with iron content is placed on the zone within
10 minutes, the cooking zone will switch off automatically.
Only for model HI17111G / HI16111G!
Please note! The appliance is connected to 1 phase. All 4 zones cannot
be used at the same time. The 2 small zones and 1 large zone or the
2 large zones can be used at the same time. Another zone needs to
be reduced or switched off if a higher level is desired. The appliance
will beep and the set power level in the display will start to flash. You
should then set the zones to a lower level!
Residual heat indicator
After use, the cooking zone used may stay hot for several minutes.
As long as the cooking zone is still hot an ‘H’ will be visible in the display.
Boost
You can use the ‘boost’ function (max. 10 minutes) to cook at the
highest power level during a short period of time.
After the maximum boost time the power will be reduced to setting 9.
01
AAAA
02
02
OPERATION
Loading ...
Loading ...
Loading ...