Loading ...
Loading ...
Loading ...
Setting a half load
The half load option means that the dishwasher will use less water and
wash for less time than a normal cycle.
IMPORTANT: You should only load 50% of the normal capacity of
items to wash. Under normal operation the dishwasher can wash
10 place settings. Using the half-load mode you should only wash
5 place settings.
o Check whether the appliance needs rinse aid or salt adding to it.
o Pull out the baskets and load them in accordance with the loading
instructions – but reducing to 50% place settings.
o Push the top and bottom baskets fully back into position.
o Add detergent
o Turn the appliance on by using the ON/OFF button.
o IMPORTANT: Wait for 5 seconds before pressing the program
selection button, otherwise the appliance may not function
correctly.
o Press the program selection button to choose an appropriate wash
program for the load that you are washing. The relevant program
indicator neon will light to show which program you have selected.
o Press the half load button (3), the half load indicator neon (7) will
come on.
o Close the door firmly, so that you hear the door lock click shut.
o After a few seconds, you will hear the appliance begin to fill with
water and the wash program will have started.
Rinse aid and salt indicator neons
o The rinse aid and salt indicator neons on the control panel will let
you know when the appliance needs rinse aid or salt adding to it.
o The neon indicates that you need to add rinse aid to the
appliance. You should follow the procedure outlined on page 13.
o The
neon indicates that you need to add dishwasher salt to the
appliance. You should follow the procedure outlined on page 11.
24
Loading ...
Loading ...
Loading ...