Loading ...
Loading ...
Loading ...
49-1000329 Rev. 2 33
INSTALLATION INSTRUCTIONS
RE-INSTALL PIZZA TRAY AND
LOWER FREEZER BASKET (on
some models)
5HLQVWDOOORZHUIUHH]HUEDVNHWILUVWWKHQUHLQVWDOO
SL]]DGUDZHU
2. Check for smooth operation of baskets.
5HLQVWDOOIUHH]HUGUDZHUE\SODFLQJWKHGUDZHU
wheels onto the top of the track mounted to the
VLGHRIWKHIUHH]HUZDOOV7KHZKHHOVRQWKH
IUHH]HUGUDZHUVKRXOGEHRQWRSRIWKHERWWRP
basket sides.
13
Installation Instructions
INSTALLING THE REFRIGERATOR (Cont.)
12
REPLACE FREEZER DRAWER
(on some models)
CAUTION
Lifting Hazard
Freezer door is heavy Use both hands to secure
the door before lifting.
1. Pull the lower basket slide mechanism to full
extension with both hands.
/LIWWKHIUHH]HUGRRUDQGDOLJQWKHKRRNVZLWKWKH
notches on the slide mechanisms.
NOTE: Place one side in first, then align the other
side.
3. Replace the attachment screws and torque the
screws to 65 in-lb (7.34 N-m).
14
REINSTALL LOWER LEFT AND
RIGHT-HAND DOORS
(on some models)
WARNING
Follow all steps for removing
and reinstalling the door. Failure to follow these
instructions, leaving off parts, or overtightening screws,
can lead to the door falling off and result in injury and
property damage.
CAUTION
Lifting Hazard
A single person lift could cause injury. Gain
assistance when handling, moving, or lifting
refrigerator doors.
1. Reinstall lower hinges first (if necessary) and
WRUTXHWKH´VFUHZVWRLQOE1P
and small screw to 25 in-lbs (2.82 N-m). Rotating
the screw by 1/3 turn after it is flush with mating
surface will achieve these torques.
2. With the door at 90° to the front of the case,
lower the refrigerator door onto the lower
hinge, carefully pulling the harness through
the right-hand hinge. Close the door and tape
closed.
3. Reinstall the center hinge per step #1 above.
4. Remove the tape.
5. Open the lower right-hand door 90°.
6. Connect the two harnesses.
7. Replace both lower hinge covers (if necessary).
)UHH]HUGRRU
hook and slide
mechanism notch
Loading ...
Loading ...
Loading ...