Loading ...
Loading ...
Loading ...
49-1000329 Rev. 2 29
INSTALLATION INSTRUCTIONS
Installation Instructions
INSTALLING THE REFRIGERATOR (Cont.)
2
REMOVE LEFT-HAND DOOR
WARNING
Follow all steps for removing
and reinstalling the door. Failure to follow these
instructions, leaving off parts, or overtightening
screws, can lead to the door falling off and result in
injury and property damage.
1. Loosen the icemaker water supply tube.
Ɣ/RRVHQDQGUHPRYHWKHWXELQJFODPSZKLFK
holds the water supply tube to the back of the
refrigerator.
Ɣ5HPRYHWKHEODFNFROODUIURPZDWHUVXSSO\WXEH
connector at the top right back of the refrigerator.
Ɣ3UHVVWKHZKLWHIODQJHGRZQDQGVHSDUDWHWKH
water supply line from the connector.
2. Remove the left hinge cover by removing 2 hinge
cover screws with a Phillips head screwdriver
and lifting from the left side. Disconnect electrical
connectors and pull the water supply tube through
the case.
3. Securely tape the door shut with masking tape or
have a second person support the door.
5HPRYHVFUHZVKROGLQJKLQJHZLWKD´VRFNHW
Lift hinge from refrigerator and door.
Collar
Connector
Water Supply Tube
Tubing Clamp
Electrical
Connections
Hinge
Screws
Ground
Screws
2
REMOVE LEFT-HAND DOOR
(cont.)
For proper installation later, please follow
these next steps carefully:
Ŷ Remove the tape keeping the door as straight as
possible, then lift up to remove.
CAUTION
Lifting Hazard.
A single person lift could cause injury. Gain
assistance when handling, moving, or lifting
refrigerator doors.
3
REMOVE RIGHT-HAND DOOR
Ŷ Remove right hinge cover.
Ŷ Securely tape the door shut with masking tape or
have a second person support the door.
Ŷ5HPRYHVFUHZVKROGLQJKLQJHZLWKD´VRFNHW
Lift hinge from refrigerator and door.
For proper installation later, please follow
these next steps carefully:
Ŷ Remove the tape keeping the door as straight as
possible, then lift up to remove.
CAUTION
Lifting Hazard.
A single person lift could cause injury. Gain
assistance when handling, moving, or lifting
refrigerator doors.
To reassemble doors, reverse removal steps.
4
REMOVE CENTER HINGE
(if necessary)
Remove screws that secure hinge to the cabinet.
,QQHUVFUHZVQHHGD´VRFNHW2XWHUVFUHZ
needs a Phillips #2.
Remove
center screw
Loosen outer
screws
Loading ...
Loading ...
Loading ...