Loading ...
Loading ...
Loading ...
86
C: Setting Custom Functions
C.Fn-08:
-
(AF-assist beam firing)
0: ON (Enabled)
1: OFF (Disabled)
This disables the emission of the AF-assist beam from the Speedlite.
C.Fn-10: / (Receiver auto power off timer)
When set as an optical transmission wireless receiver unit, the time until
auto power off takes effect can be changed. Note that when the receiver
unit’s auto power off takes effect, </> is displayed on the LCD panel. Set
this function on each receiver unit.
0: 60min (60 minutes)
1: 10min (10 minutes)
C.Fn-11: 0 (Receiver auto power off cancel)
In optical transmission wireless flash photography, when you press the test
flash button on the sender unit, you can turn on the receiver units that are in
the auto power off state. You can change the time for the receiver units in
the auto power off state to accept this function. Set this function on each
receiver unit.
0: 8h (Within 8 hours)
1: 1h (Within 1 hour)
C.Fn-13: 6 (Flash exposure compensation setting)
0: 4 (Speedlite button and dial)
1: 5 (Speedlite dial only)
You can directly set the flash exposure compensation amount and
flash output by turning <9> without pressing the <O> button of the
<S> cross keys.
The flash icon displayed when C.Fn-08 is set changes according to the
P.Fn-04 (AF-assist beam emission method, p.89) setting.
Loading ...
Loading ...
Loading ...