Loading ...
Loading ...
Loading ...
39
Modeling Flash
To avoid degrading and damaging the flash head due to overheating,
limit firing the modeling flash up to 20 times. After firing modeling flash
for 20 times, allow a rest time of at least 10 min.
If you fire the modeling flash for the above listed number of times, and
then fire the flash again repeatedly at short intervals, the safety function
may activate and restrict flash firing. With flash firing restriction level 1,
the firing interval is automatically set to approx. 8 sec. If this happens,
allow a rest time of at least 40 min.
During Live View shooting, firing modeling flash (by operating the
camera) is not possible.
Modeling flash (by operating the camera) is disabled when using the
flash with EOS M6, EOS M5, EOS M3, EOS M2, EOS M, EOS Elan II/
Elan II E/50/50E, EOS REBEL 2000/300, EOS REBEL G/500N, EOS
REBEL K2/3000V, EOS REBEL XS N/REBEL G II/3000N/66, EOS IX, or
EOS IX Lite/IX7. Set C.Fn-02 to 1 or 2 (p.85), and then fire modeling
flash using the test flash button. (When using the EOS M series cameras
listed above, the test flash button functions when the camera’s metering
timer is not active.)
You can use the test flash button to fire the modeling flash (C.Fn-02, p.85).
Loading ...
Loading ...
Loading ...