Loading ...
Loading ...
Loading ...
6
SAFETY PRECAUTIONS
Check the following items before use:
• Empty the dust bin after each operation or prior to it filling up.
• Remove any cables or long strings from the floor.
• Remove any moisture from the floor before cleaning.
• Close the cover of the dust bin before cleaning.
• Remove fragile or unnecessary objects from the room to be cleaned.
For example, remove expensive ceramics and valuables from the floor.
• Confirm whether the battery has sufficient power, and if it is low, recharge it.
• Close the doors of any room that you do not want the Robot Cleaner to enter.
During cleaning, the Robot Cleaner may enter another room and continue cleaning.
• Do not use this product in the room where a child is sleeping alone. The child can be hurt or
woken.
• Remove towels, foot towel or any other thin cloth from the floor as they can get caught by the
brush.
• Before starting the device, it's better to remove carpets that are thicker than 20 mm as they
may cause it to malfunction.
• Please close any balcony doors as the wheels may get stuck while cleaning.
• Please install the mop board since climbing low heights, such as bottom of a standing
electric fan, may cause damage to the robot cleaner.
• Connecting to a wireless router without proper security setup may cause security issues.
• If security is set up internally for your organization, it may affect connection therein.
• All batteries/accumulators should be disposed separately from the municipal waste stream
via designated collection facilities appointed by the government or the local authorities.
• For more detailed information about disposal of Your old batteries/accumulators, please
contact Your city office, waste disposal service or the shop where You purchased the product.
• All electrical and electronic products should be disposed of separately from the municipal
waste stream via designated collection facilities appointed by the government or the local
authorities.
• For more detailed information about disposal of your old appliance, please contact your city
office, waste disposal service or the shop where you purchased the product.
• In the case of a floor with high brightness contrast such as marble, the recognition rate of the
bottom sensor may be lower, and the robot cleaner may operate abnormally.
Tip
CAUTION
If the floor is wet or has wet
spots, wipe them up before
using the Robot Cleaner. Do
not use the Robot Cleaner on a
wet surface.
Doing so can cause product
failure.
When the robot cleaner is
operating, it may hit the chair
leg, desk leg, table leg or other
narrow pieces of furniture.
For quicker and better cleaning,
place the dining chairs on top
of the dining table.
NOTE: Very low thresholds will
allow the Robot cleaner to go
over them and perhaps into an
undesirable location. Make sure
that all the doors of the rooms
that are not to be cleaned are
closed. Oddly shaped and
sized thresholds can cause the
cleaner to become stuck. This
is not a malfunction.
To save energy when the Robot
Cleaner is not in use for longer
periods, turn off the power
switch, and turn on the power
switch again just prior to using
the Robot cleaner again.
Loading ...
Loading ...
Loading ...