User Manual Philips DVT6110 VoiceTracer Audio Recorder

• User Manual - (English)
• Quick start guide - (English)

Table of contents

• Your VoiceTracer audio recorde
• Get started
• Recording
• Playback
• Settings
• Connect to VoiceTracer App
• Device and data management
• Troubleshooting

Your VoiceTracer audio recorde

What's in the box

Overview of your audio recorder

1. 360° microphone
2. Directional microphone
3. Record/Status LED
4. Display
5. Left function button
6. Middle function button
7. Right function button
8. Up button
9. Backward button
10. Record button
11. Down button
12. Forward button
13. File list/Back button
14. Play/Stop button
15. Tripod thread
16. Power/Lock switch
17. Wi-Fi on/off switch
18. Reset button
19. External microphone jack
20. Headphones jack
21. MicroSD card slot
22. USB Type-C port
23. Speaker
24. Eye for wrist strap

Get started

Charging the battery

Charge the built-in battery before you use the device for the first time or if you haven’t used it for an extended time period. If the battery is completely discharged and your device turns off, allow the battery to charge for a while before you turn on the device

A charging battery icon appears on the screen and the Record/Status LED flashes orange for a few seconds.

Turn the device on and off

To turn the device on or off:

• Slide and hold the Power switch on the right side of the device downwards for three seconds.

Key lock

You can lock your device when it’s active to prevent any unwanted device operations or access.

To lock the device:

• Slide the Power switch on the right side of the device upwards towards the lock symbol.
  • The lock symbol appears on the screen for a moment.
  • All buttons are locked now.

To unlock the device:

• Slide the Power switch downwards.
  • The unlock symbol appears on the screen for a moment.

Connect to a computer

You can use your recorder as a USB mass storage to conveniently store, back up and move files. Link the device to a computer with a USB cable. Your recorder will automatically be recognized as a mass storage device. You don’t need to install any software

Set the date and time

You can always change the date and time as well as the time format on your device.

1. In stop mode, press the Right function button to open the settings panel.
2. Press the Record button to select All settings.
3. Press the Right function button to enter the Device settings.
4. Press the Down button to navigate to Date & time and then press the Record button to confirm.
5. Press the Up/Down buttons to navigate to your desired setting Date, Date format, and Time. Use the Forward and Backward buttons to change your desired setting.
6. Press the Record button to confirm your settings.
7. Press the Back button to return to the stop mode screen.

Set the device language

You can always change the language of your device.

1. In stop mode, press the Right function button to open the settings panel.
2. Press the Record button to select All settings.
3. Press the Right function button to enter the Device settings.
4. Press the Record button to select Language.
5. Press the Up/Down buttons to navigate to your desired language, and then press the Record button to confirm your selection.
6. Press the Back button to return to the stop mode screen

Recording

Record a file

Before you start recording:

• Make sure your device has enough battery power left. When your battery is almost discharged, you will see a battery low icon .
  • The device will turn off and your current recording will automatically be saved.
• First select the folder you want your recording to be saved in. You can store 100 files in each of the folders A, B, C, and D.

If one of the folders is full, your subsequent recordings will automatically be stored in the next folder.

• We recommend that you make a test recording in order to find the most suitable presets for your recording and achieve the best recording results.

Start a new recording

1. In stop mode, press the Left function button to start a new recording.

• The new file mode screen is displayed.

2. Press the Right function button to open the settings panel.

To select a folder for your recording to be saved in.

• Press the Up/Down buttons to navigate to Folder and then press the Record button to confirm your selection.

Press the Up/Down buttons to navigate to the folder you want your new recording to be saved in and then press the Record button to confirm your selection..

To return to the stop mode screen, press the Back button.

To adjust the settings for your recording:

• Press the Up/Down buttons to navigate to your desired setting and then press the Record button to confirm your selection.

To return to the stop mode screen, press the Back button.

3. Press the Record button to start recording.

• The recording screen is displayed.
• The Record/Status LED illuminates red.

4. Press the Record button again to stop recording.

• The recording is saved to the preselected folder.

Edit a file

You can edit existing recordings in stop mode by appending or overwriting a recording.

Append: Add additional recording parts at the end of an existing recording.

Overwrite: Overwrite an existing recording part starting from any point within the recording.

To append a recording part:

In stop mode of an existing file, press the Record button.

• If the cursor of the audio progress bar is at the end of the recording:
  • The recording screen is displayed and a new recording part is added at the end of your file.
• If the cursor of the audio progress bar is at the beginning of the recording:
  • The editing panel opens.
    • Press the Up/Down buttons to select Append and then press the Record button to confirm your selection.
    • The recording screen is displayed and a new recording part is added at the end of your file.

To overwrite a recording part:

1. In playback mode, press the Play/Stop button to stop playback at your desired part.

2. Press the Record button.

• The editing panel opens.

3. Press the Up/Down buttons to select Overwrite and then press the Record button to confirm your selection.

• The recording screen is displayed and a new recording starts from where you stopped playback.

Playback

Play back files

Start and stop playback

1. In stop mode, press the Previous track or Next track button to navigate to your desired recording.

To start playback, press the Play/Stop button.

• The Record/Play indicator illuminates green.

Alternatively, press the File list button and then press the Up/Down buttons to navigate to your desired recording. To start playback, press the Play/Stop button.

2. To adjust the volume, press the Up/Down buttons.

3. To stop playback, press the Play/Stop button.

4. To continue playback, press the Play/Stop button again.

Fast rewind or fast forward

• In playback mode or stop mode, press and hold the Backward or Forward button to jump to the desired part of the recording. Release the switch when you have reached your desired playback part.

Play back files from a selected folder

1. In stop mode, press the File list button.

• All voice recordings are displayed.

2. Press the Left function button to open the folder panel.

3. Press the Up/Down buttons to navigate to your desired folder and then press the Record button to confirm your selection.

• Only the files in the selected folder are displayed now

Delete files

You can delete individual files from your device.

1. In stop mode or playback mode, press the Right function button to open the settings panel.
2. Press the Up/Down buttons to navigate to Delete and then press the Record button to confirm your selection.

Settings

Settings mode

In the settings mode, you can change and adjust various settings according to your own preferences.

Start the settings mode

1. In stop mode, press the Right function button to open the settings panel.
2. Press the Record button to select All settings

Navigate between settings

• Use the Up/Down buttons.

Select a setting

• Press the Record button.

Recording settings

Scene

Select ascene according to specific recording situations, e.g. a lecture or an interview. Every scene has predefined settings, such as the format or the microphone sensitivity, thatcannotbe changed. If you would like to change the settings of a scene, you need to select the scene Custom where you can define each setting according to your own preferences.

Format

Select the format of your recording according to specific recording situations.

Mic sensitivity

Adjust the microphone sensitivity of your VoiceTracer. Select the sensitivity according to the background noise, number of recorded sound sources and distance between sound source and microphones.

Limiter

Activate this function to prevent recordings from being oversteered by sound input over the maximum sound level. If the recording suddenly exceeds the maximum sound level, the microphone sensitivity is automatically reduced.

Mic selection

Select if the zoom mic or the 360 degrees microphones should be used for your recordings.

Noise cut

Turn the Noise cut feature on in order to reduce background noise while recording. This way, especially audio recordings sound clearer.

Wind filter

Activate the wind filter to reduce wind noise when you are recording in a very windy environment.

Folder

Select the folder you want your recording to be saved in. Voice activation

Use voice activation to start recording when you begin speaking. When you stop speaking, the device will automatically pause recording after three seconds of silence. It will resume only when you begin speaking again.

Edit mode

Select what should happen when you edit a recording.

Pre-recording

When the pre-recording function is enabled, the device will start recording some seconds prior to the event.

Timer

Use the timer function to automatically start recording on a preset date and at a preset time. You can also select when the recording should stop.

Auto divide

During recording, the auto divide feature will automatically split the current recording and save a new file every 15, 30 or 60 minutes.

Auto bookmark

Use the Auto bookmark funktion to automatically set bookmarks at preset time intervals.

External input

Choose between various input sources to guarantee the best recording quality for specific recording situations.

Playback settings

Play mode

Choose between various playback options.

Equalizer

Choose between the equalizer music options Classical, Jazz, Pop, or Rock.

ClearVoice

Activate the ClearVoice function for better playback quality. Dynamic emphasis on quiet passages improves the intelligibility of quiet voices.

Device settings

Language

Select your desired device language from the language list. Youcan change the language whenever you want.

Brightness

Adjust the brightness of your screen acccording to your own requirements.

Backlight

To save your VoiceTracer’s battery power, you can reduce the backlight time. If you don’t operate your device for the preset time, the backlight turns off automatically.

Date & time

You can always change the system date and time on your device. Use the Backward, Forward, Up, and Down buttons to set the date and time.

Recording light

If you turn on the recording light, the Record/Status LED will illuminate red when recording.

Auto Off

Select a time for your device to automatically turn off when you don’t operate it.

Device sounds

Select if you want the device sounds, such as key tone and power on/off sound, to be turned on or off.

Select storage

Select if you want your recordings to be saved on the device's internal storage or on the external memory card

Format storage

Use this function to format your device’s internal storage or the memory card and delete all data.

Reset settings

You can reset your menu settings to their default state—the way they were when you first purchased your device and turned it on.

Information

See various information about your device, such as the available memory space or the firmware version.

Connect to VoiceTracer App

You can connect your VoiceTracer to the dedicated Philips VoiceTracer App via Wi-Fi. This allows you to remotely control your VoiceTracer with your smartphone. In addition, you can easily and conveniently transfer recordings from your VoiceTracer to the app and then share and forward your recordings immediately from your smartphone.

To connect your VoiceTracer to the app:

1. Download the Philips VoiceTracer App from the Google Play Store or the Apple App Store on your smartphone.

2. Once the app is downloaded, open it on your smartphone.

3. When using the app for the first time, a registration screen is displayed. You need to register by entering your first name, last name and an email address.

• An instruction screen is displayed.
• Follow the on-screen instructions precisely and follow each step in the displayed order.

4. When the VoiceTracer starts scanning for available Wi-Fi networks, select your smartphone's hotspot by using the Up/Down buttons and then confirm with the Record button.

• On the VoiceTracer screen, the password dialog is displayed.

5. On the password dialog screen of your VoiceTracer, enter the Wi-Fi password of your smartphone's hotspot by using the function buttons, the Up, Down, Backward, and Forward buttons.

• Your VoiceTracer is now connected to the

VoiceTracer App on your smartphone and the WiFi symbol is displayed on your VoiceTracer screen.

Device and data management

Transfer data to the computer

You can quickly and conveniently move files from your VoiceTracer to your computer. Link the device to a computer with a USB cable. Your recorder will automatically be recognized as a mass storage device. You don’t need to install any software.

For more information on how to connect your device to a computer, see the illustration in Charging the battery.

Transfer data from VoiceTracer to the computer

1. Connect the device to the computer via the supplied USB cable.

• A charging battery icon appears on the screen and the Record/Status LED flashes orange for a few seconds.

2. Open Windows Explorer on a Windows computer, or open Finder on a Mac computer.

• Your VoiceTracer is recognized as an external drive.

3. Double-click the VoiceTracer drive.

• The content of your VoiceTracer is displayed in a new window.

4. Select the desired files from one of the folders and copy, cut or drag them to the desired location on your computer.

Reset your device and data

Device reset

If you should encounter problems with your device software, for example, the software freezes, the device works slowly or apps don’t respond, you can reset your device and restart it.

1. Press and hold the reset button on the right side of your device by using a small, pointed object, for example, a paper clip.

2. To restart the device, slide and hold the Power switch on the right side of the device downwards for three seconds.

Reset data

You can format your device’s internal storage and delete all data from your device.

To reset your data:

1. In stop mode, press the Right function button to open the settings panel.
2. Press the Record button to select All settings.
3. Press the Right function button to enter the Device settings.
4. Use the Up/Down buttons to navigate to Format storage and then press the Record button to confirm your selection.
5. Select if you would like to reset the data on the internal storage or on the memory card, and then press the Record button to confirm your selection.
6. Select Delete.

• All data is deleted from the selected storage.

Reset settings

You can reset your menu settings to their default state— the way they were when you first purchased your device and turned it on.

To reset your settings:

1. In stop mode, press the Right function button to open the settings panel.
2. Press the Record button to select All settings.
3. Press the Right function button to enter the Device settings.
4. Use the Up/Down buttons to navigate to Reset settings and then press the Record button to confirm your selection.
5. Select Reset.

• All settings on your device are reset to their default state.

Updating your device

Your device is controlled by an internal program called firmware. As a part of ongoing product maintenance, the firmware is upgraded and errors are corrected.

It is possible that a newer version (an ‘update’) of the firmware has been released since you purchased the device. In this case, you can easily update your device to the latest version.

Update your VoiceTracer

1. Connect the device to the computer via the supplied USB cable.

• A charging battery icon appears on the screen and the Record/Status LED flashes orange for a few seconds.

2. Download the firmware update file for your model from the product website www.voicetracer.com/help.

3. Unzip the firmware update file you downloaded from the product website.

4. Open Windows Explorer on a Windows computer, or open Finder on a Mac computer.

5. Double-click the VoiceTracer drive.

• The content of your VoiceTracer is displayed in a new window.

6. Copy the firmware update file to the root directory of the device.

• During this process, the Record/Status LED flashes orange. When the process is complete, the Record/Status LED stops flashing.

7. Disconnect the device from the computer.

• The firmware is automatically updated.
• The Firmware update window is displayed. When the update is complete, the device will automatically switch of

Troubleshooting

Find the most common problems you could encounter with the VoiceTracer in the following table. If you are unable to solve the problem with the information below, contact the supporting Philips partner you purchased the device from.