Loading ...
Loading ...
Loading ...
Using thepyrolitic cycle:
1- Rotatethe function selector tothe position " ". Onthe display, appears the indication " ECO "or
" SUP ". The preset time is 90 min, this can be varied from 90 min (Eco mode) to 120 min (Sup mode) via
the programmer (setting button " + " or "- "). If the oven isvery dirty, it isrecommend oincrease thetime
to120 min, ifthe ovenis moderately dirty reduce thecleaning cycle timeto 90min.
2- It is possible to defer the start time of the pyroclean cycle by changing the END time via the
programmer.
3- After few minutes, when the oven reaches a high temperature, the door locks automatically. The
pyrocleancycle canbe stoppedat any time byturning the functionselector backto '0' (theword OFFwill
be displayed for 3seconds).
4- Once thepyroclean cycle is finished,the pyrolysis will switch off automatically. On the display appears
the indication "END"until the dooris locked then"0--n".
5- You can turn the function selector back to " 0 " but if the temperaure is still high, the "0--n " indication
appearsto inform thatthe dooris locked.
Use ofthe pyrolyticcycle inTouchControl ovens:
1- Rotate the functionselector into positionpyrolisys. The display willshow either "ECO" or"SUP“
2- The pre-set time is90 minutes but it can be varied from 90 min. (Eco mode) to 120 min. (Sup mode)
using the programmer (" +" or "-" key). If the oven is very dirty, the time should beincreased to 120 min.,
while ifthe ovenis only aslightly dirty, reducethe cleaningcycle to90 min.
EN 12
4.3 Aquactiva Function
The Aquactiva procedure uses steam to help remove remaining fat and food particles from the oven.
1. Pour 300 ml of water into the Aquactiva container at the bottom of the oven.
2. Set the oven function to Static ( )or Bottom ( )heater
3. Set the temperature to the Aquactiva icon
4. Allow the program to operate for 30 minutes.
5. After 30 minutes switch off the program and allow the oven to cool down.
6. When the appliance is cool, clean the inner surfaces of the oven with a cloth.
Warning:
Make sure that the appliance is cool before you touch it.
Care must be taken with all hot surfaces as there is a risk of burns. Use distilled or drinkable water.
N.B.: Certain pyrolytic ovens with the Precò Touch User Interface offer the Aquactiva function. To
activate it, set the function selector to the AQUACTIVA symbol ( ) and set the oven temperature
to 90°, using the “-” and “+” keys.
300 ml
Loading ...
Loading ...
Loading ...