Loading ...
Loading ...
Loading ...
Changing a light bulb
14
IMPORTANT: BEFORE ATTEMPTING TO CHANGE
A LIGHT BULB, YOU MUST ENSURE THAT YOU
HAVE DISCONNECTED THE COOKER HOOD FROM
YOUR MAINS SUPPLY.
o Remove the metal filters by pulling down on the handle and
pulling them away from the cooker hood. This will allow you
access to the lamp area.
o Prior to touching the light bulb ensure that it has cooled down.
o Replace the bulb using only olive-shaped spares with an E14
coupling, max. 40W. Replace the grease filter support grilles.
o IMPORTANT: Defective bulbs should be replaced immediately.
o If the lights still do not work, make sure that the bulbs are fitted
properly into their housings before you call for technical
assistance.
Fitting the carbon filter
If the appliance is going to be used in recirculation mode then it is
necessary to a fit a carbon filter. This will help to absorb unpleasant
odours caused by cooking.
IMPORTANT: BEFORE ATTEMPTING TO FIT OR
REMOVE THE CARBON FILTERS, YOU MUST
ENSURE THAT YOU HAVE DISCONNECTED THE
COOKER HOOD FROM YOUR MAINS SUPPLY.
o You will find that one filter will attach over the front of the fan
motor. The active carbon filter must be replaced at least every
four months depending on usage to allow normal operation when
in recirculation mode.
1) Remove the metal filters by pulling down the
handle and pulling them away from the cooker
hood. This will allow you access to the motor.
Loading ...
Loading ...
Loading ...