1. Home
  2. Whynter
  3. Whynter ARC-1230WN User Manual
  4. Page 15

User Manual - Page 15

For ARC-1230WN. Also, The document are for others Whynter models: ARC-1030WN, ARC-1230WNH

Loading ...
Loading ...
Loading ...
The portable air condioner can be switched on by the remote control. To transmit signals from the remote control to the air
condioner, point the front part of the remote handset towards the control panel on the air condioner. Recepon of the signal
is conrmed by a beep. The maximum signal transmission distance is approximately 8 meters / 26 feet.
NOTE:
• Other appliances in the same room controlled by a remote control (TV, radio, stereo, etc.), may cause interferences
• Electronic and uorescent lamps may interfere with the signal transmissions between the remote control and the air condi-
oner
• Remove the baeries if the remote control is not used for long periods
1
Mode indicator Displays the current selected mode (Auto, Cool, Dry, Heat* or Fan)
2
Wireless indicator Displays when the remote is turned on, and disappears when it is turned o
3
Timer On indicator Displays when TIMER ON is set
4
Timer O indicator Displays when TIMER OFF is set
5
Swing indicator Displays auto-swing feature is turned, and disappears when it is turned o
6
Temperature/Timer display (h)
Displays the set temperature or timer setting when using ON/ OFF functions
"h (hours)" indicator is shown when timer settings are activated
7
Remote Control indicator
Displays when the remote is turned on and disappears when it is turned o
8
Temperature Scale indicator Displays temperature scale Fahrenheit or Celsius
9
Lock sengs indicator Indicated all the current sengs are locked
10
Sleep Feature indicator Displays when SLEEP funcon is acvated
11
I Sense Feature indicator Displays when I SENSE funcon is acvated
12
Fan Speed indicator Displays the current selected fan speed
13
Up buon Increases set temperature/me
14
Down buon Decreases set temperature/me
15
Mode buon
Controls the function modes: Auto, Cool, Dry, Heat* and Fan
*only for ARC-1230WNH
16
Power buon Turns the unit On and O
17
Fan Speed buon
Controls the fan speeds: Auto, High, Medium, or Low
(Connuous mode cannot be set using the remote control)
18
Swing Feature buon Press to stop or start louver auto-swing feature
19
Sleep Feature buon Starts or stops louver movement and set louver angle
20
Timer ON buon Enables the Timer On
21
I Sense Feature buon Press to iniate I SENSE feature
22
Lock sengs buon Press I SENSE and TIMER OFF buons to lock current sengs
23
Timer OFF buon Enables the Timer O
24
LED Display buon Press this buon to turn on and turn o the display on the indoor unit
25
Temperature Scale buon Press to change Temperature Scale (Fahrenheit | Celsius)
REMOTE CONTROL
Page 15
Loading ...
Loading ...
Loading ...