Loading ...
Loading ...
Loading ...
www.SereneLifeHome.com
5
STEP 2
It is recommended to have a second person assist with this step. One person should hold the Computer
Console in place while the other person connects the cables. Connect the Main Control Cable from the Right
Handlebar Support Tube to the cable that comes from the Computer Console.
Install the Handlebar Bracket onto the Right and Left Handlebar Support Tubesusing two M8x16 Hexagon
Socket Oval Head Bolts (S3).
IMPORTANT:
• While sliding the Handlebar Bracket onto the Right and Left Handlebar
• Support Tubes make sure the cables are installed inside the Right Handlebar
• Support Tube and pay attention not to pinch the cables.
NOW PLEASE FULLY TIGHTEN ALL BOLTS INSTALLED IN STEP 1.
Step 3
A. Remove one Flat Head Phillips Screw from both sides of the Frame.
Attach the Rear Left Cover onto the left side of the Frame. Align the
holes and secure the Rear Left Cover using the one Flat Head Phillips
Screws, that were previously removed by Allen Wrench.
B. Align the holes and secure the Rear Right Cover using the one Flat
Head Phillips Screws that were previously removed by Allen Wrench.
S3
S3
Frame
Rear Left Cover
Rear Right Cover
Loading ...
Loading ...
Loading ...