Dji FOCUS User Manual

Loading ...

DJI FOCUS

User Manual

travel limit and select Set Point 2. Turning the focus wheel from Point 1 to Point 2 will rotate the

camera focus by a full cycle.

LED Control: Enable or disable the LED and system status indicators on the remote controller

and motor individually.

Default: Restores the default settings for the remote controller.

About

Displays the current rmware version of the remote controller.

Aperture Control

Once aperture control is enabled, the 'D' button is used to switch between focus control and

aperture control.

To switch from focus control to aperture control, press the 'D' button and then follow the

instructions in the DJI GO app to operate the focus wheel. Press the 'D' button again to switch

back to focus control.

Firmware Update

The DJI Focus rmware can be updated through the DJI PC/MAC Assistant.

Installing the DJI PC/MAC Assistant

Windows

1. Download the DJI WIN DRIVER INSTALLER and Assistant from the DJI Focus product page

on DJI.com.

2. Double click the Assistant installer and follow the steps to nish the installation. Then, launch

the Assistant.

TIPS

The Assistant installer can be used on Windows XP (32 or 64 bit) or above.

Mac OS X

1. Download the Assistant installer (.DMG) from DJI.com, and then run the installer and follow

the prompts to nish the installation.

2. When launching for the rst time, if using Launchpad to run the Assistant, Launchpad will

block access because Assistant has not been reviewed by the App Store. Locate the

Gimbal icon using the Finder, press Control, then click the icon (or right-click the icon using

a mouse). Choose Open from the shortcut menu, then click Open in the dialog box to launch

the program.

3. After the first successful launch, double click the Gimbal icon, as usual, to launch the

program using the Finder or Launchpad.

TIPS

The DMG installer supports Mac OS X 10.9 or above.

Loading ...

Dji FOCUS