Dji FOCUS User Manual

Loading ...

Used with the Zenmuse X5

DJI Focus is fully compatible with the Zenmuse X5 series gimbal and camera. No calibration is

required when using the Focus with the Zenmuse X5 camera.

Connection

To allow communication between the two devices, connect the communication port on the

Focus remote controller to the CAN Bus port on the Inspire 1 remote controller using the

dedicated CAN Bus cable.

TIPS

Ensure that the Zenmuse X5 camera is set in AF mode.

The remote controller overrides the in-app controls. You will not be able to adjust

the focus or aperture in the DJI GO app.

You can purchase the dedicated CAN Bus cable on the DJI Store.

Settings

The Focus remote controller will display the following information when it is connected to the

Inspire 1 Pro or Raw system.

Zenmuse X5 Settings

Aperture: Enable or disable aperture control.

Direction: The motor’s direction of rotation – normal or reversed.

Default: Restore the default motor parameters.

Settings

Power Off: Idle time before the remote controller auto-powers off-10 min, 30 min, 60 min or never.

Endpoints: The upper and lower travel limits of the focus wheel. Turn the focus wheel to the

desired upper travel limit and select Set Point 1. Then, turn the focus wheel to the desired lower

50.0%

Loading ...

Dji FOCUS