Dji FOCUS User Manual

Loading ...

[1] Battery Level

[2] Focus Wheel Travel Percentage

[3] Focus Wheel Travel Bar

[4] Main Menu

[5] Calibration Menu

[6] Wireless Signal Strength

[7] Calibration Status

Calibration

The motor remembers your last calibration and does not need to be re-calibrated every time it

is turned on unless you swap lenses or change the motor position after the motor has been shut

off. It is recommended to perform a calibration in order for the motor to nd the end points on a

lens when installing the motor.

If your camera lens has mechanical limits, use auto calibration. Otherwise, use Manual-Remote

or Manual-Hand calibration.

Auto

On the remote controller, select Calibrate

Auto (Shortcut: Press the 'A' and 'B' buttons together).

The motor gear will rotate in each direction in turn to locate the mechanical limits of your camera

lens. When the calibration is complete, select Back to apply the calibration or Stop to cancel.

Manual-Remote

Select Calibrate

Manual-Remote Start to begin. Hold down the up arrow to rotate the lens

in one direction, and select OK when it reaches the desired upper limit. Next, press the down

arrow to rotate the lens in the other direction, and select OK when it reaches the desired lower

limit.

Note: You will be reminded if the motor reaches its mechanical limits.

Manual-Hand

Select Calibrate

Manual-Hand Start to begin. Rotate the lens manually to the desired upper

and lower limits of your camera lens, and select OK to conrm the limits.

When the calibration is complete, select Back to apply the calibration or Stop to cancel.

Settings

When both the remote controller and motor are turned on. The OLED screen of the remote

controller will display the following information.

50.0%

Calibrate Menu

[1]

[7]

[2]

[3]

[4][5]

[6]

Loading ...

Dji FOCUS