Loading ...
Loading ...
Loading ...
To enjoy a nice cool breeze on a hot day, you need:
1. Well-ventilated room
2. Relative humidity <70%
3. 1300 ml (44 oz) of pure water
4. Power supply 2.5A 5V
2.5A 5V
BASIC PRINCIPLES OF WORK
Ensure the device is placed on the flat horizontal surface first.
FILLING WITH WATER
1. Slide the water reservoir up.
2. Open the lid and fill the reservoir with water.
3. Place the reservoir back onto the base. Make sure it is installed
properly. The water will start flowing automatically.
Depending on the air temperature and humidity, the full reservoir
should provide from 3 to 8 hours of uninterrupted cooling.
TIP: To extend the time period before the next refill, you need to fill
up the reservoir, wait until the cartridge is full of water (max.10 minutes)
and then refill the reservoir once again.
OPERATING
4. Use a laptop or PC/power bank/adaptor plugged into the socket
as a power source. 2.5A 5V is a minimum requirement.
5. The Power button on the top of the device will light up. Press
this button. The device will switch on with a short vibration.
TO START THE DEVICE
FOLLOW THE STEPS
Humidity
<70%
7 8
Loading ...
Loading ...
Loading ...