Loading ...
Loading ...
Loading ...
17 18
1. 2. 3.
4. 5. 6.
REPLACING THE CARTRIDGE
SETTINGS RESTORE
To restore the settings, turn the device off (with the only Power button
visible on the screen) press a combination of the Up and Down buttons
(you can press with fingers or with your palm edge) and Power button
all at once. Then press the Up button, you will see the “Ur” (User set-
tings restore) letters blinking. Confirm your choice by pressing OK. You
will see the entire display turn on and off again. Done, settings restored.
Make sure the device has no water and is dry before installing a new
cartridge to prevent any water damage.
1. Disconnect the device from the power source.
2. Remove the reservoir by sliding it up.
3. Pull out the safety panel to reach the cartridge.
4. Take out the old cartridge by sliding it out.
5. Place a new cartridge in place of the old one.
6. Put the safety panel back to hide the cartridge.
7. Put the reservoir back in place.
8. The device is ready to use.
• Depending on usage and storage, the cartridge can last 3-6 months.
• Poor water quality reduces the lifespan of the cartridge.
! Remove the water tank and set the device to run at the maximum
fan speed for at least one hour to dry the water out from the internal
reservoir before taking out the cartridge. Do not take the cartridge out
of the device unless it is done.
Loading ...
Loading ...
Loading ...