User Manual eufy security SoloCam L20, Spotlight Camera, Wireless Outdoor Security Camera, Battery Camera, Ultra-Bright, 1080p Resolution

• User Manual - (English, French, Portuguese, Spanish, German, Arabic, Dutch - Holland, Italian)
• SoloCam L20 manual us - (English)

• Monitoring sticker - (English)

Table of contents

• PRODUCT OVERVIEW
• CHARGING SOLOCAM
• SETTING UP SOLOCAM
• MOUNTING SOLOCAM
• NOTICE

PRODUCT OVERVIEW

1. Camera Lens

2. Motion Sensor

3. Photosensitive Sensor

4. LED Indicator

5. Microphone

6. Mounting Hole

7. SYNC Button

8. Type-C Charging Port

9. Speaker

CHARGING SOLOCAM

Battery-powered

SETTING UP SOLOCAM

Download the App and Set up the System

1. Download and install the eufy Security app, and sign up for an account

2. Follow on-screen instructions to add your SoloCam .

MOUNTING SOLOCAM

Select a Location

SoloCam L20 / L40 can be mounted on a wall or ceiling. Select a location where you can get the desired view. We recommend hanging it 7-10 ft (2-3 m) above the ground.

Mount SoloCam L20 / L40

SoloCam L20 / L40 can be mounted both outdoors and indoors.

1. Turn the knob of the mounting bracket counterclockwise to loosen and disassemble it.

2. Place the mounting bracket against the wall. Drill holes with a 15/64 inch (5.99 mm) drill bit, then insert the anchors into the holes; anchors are necessary for walls that are made out of hard materials such as concrete, brick, or stucco.

3. Firmly screw the knob of the mounting bracket into the mounting hole of SoloCam.

4. Hold and screw SoloCam to the mounting bracket. Rotate SoloCam to adjust the view and check it using the live stream which you can access in the eufy Security app

SoloCam L20 / L40 can be also installed on the ceiling. Follow the steps 1-4 mentioned above to install it.

Tips: For troubleshooting, check Help on the eufy Security app. Refer to the app page for LED indicator status.

NOTICE

This product complies with the radio interference requirements of the European Community.

Hereby, Anker Innovations Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit the Web site: https://uk.eufylife.com/.

This product can be used across EU member states.

Due to the used enclosure material, the product shall only be connected to a USB Interface of version 2.0 or higher.

The adapter shall be installed near the equipment and shall be easily accessible.Do not use the Device in the environment at too high or too low temperature, never expose the Device under strong sunshine or too wet environment.

The suitable temperature for T8122/T8123 and accessories is -20°C-50°C.

When charging, please place the device in an environment that has a normal room temperature and good ventilation.

It is recommended to charge the device in an environment with a temperature that ranges from 5°C~25°C.

Please make sure to use only the charger provided by the manufacturer. When the manufacturer does not provide the charger, please use a charger that complies with EU regulations, otherwise it may cause danger and violate the authorization of the product and warranty terms.

RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 20cm distance between the device and human body.

CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

Wi-Fi Operating Frequency Range: 2412~2472MHz; Wi-Fi Max Output Power:19dBm The following importer is the responsible party (contact for EU matters only)

Anker Innovations Deutschland GmbH I Georg-Muche-Strasse 3, 80807 Munich, Germany

This product is designed and manufactured with high quality materials and components, which can be recycled and reused.

This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.

This product complies with the radio interference requirements of the United Kingdom

Declaration of Conformity

Hereby, Anker Innovations Limited declares that this product is in compliance with Radio Equipment Regulations 2017. The full text of the UK declaration of conformity is available at the following internet address: https://uk.eufylife.com.

Anker Technology (UK) Ltd I Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom