Anker Innovations Limited. All rights reserved.
eufy Security and eufy Security Logo
are
trademarks of Anker Innovations Limited, registered in the United States and other countries.
All other trademarks are the property of their respective owners.
Model: T8112
51005001273 V01
Quick Start Guide
eufyCam E Wire-Free HD
Security Camera
Table of Content
What's in the Box 01
Adding eufyCam E to Your Existing System 03
Find a Good Mounting Spot 04
Mounting the Camera Outdoors 06
Mounting the Camera Indoors 08
Charging eufyCam E 10
Safety 14
Customer Service 19
01 02
1. eufyCam E is only compatible with the eufyCam or eufyCam E
Security System.
2. Make sure the region printed on your product package (A or B)
matches the region printed on your HomeBase.
Region A or B
Region A or B
What's in the Box
Indoor Mount
Outdoor Mount
Micro-USB
Charging Cable
Mounting Screws
and Anchors
Hook
(for Indoor Mount)
eufyCam E
(T8112)
Keep the camera at least 1 ft away from your internal / external hard drives.
07 08
Mounting the Camera Indoors
Stick the camera directly to any flat surface made out of iron. Or you can use the
indoor mount to mount the camera:
a
Drill a hole. Use the included
anchor if it’s drywall and fasten
the hook.
b
Screw the base of the outdoor
mount onto the wall. Fasten
the ball bracket of the outdoor
mount to the base of the
outdoor mount.
c
Fasten eufyCam E to the outdoor
mount and adjust the viewing
angle by checking the live stream
feed in the eufy Security app.
14
13
For troubleshooting, check Help on the eufy Security app.
Refer to app page for LED indicator status.
Safety
FCC Statement
T
his device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Warning:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try
1615
to correct the interference by one or more of the following measures: (1) Reorient or relocate
the receiving antenna. (2) Increase the separation between the equipment and receiver. (3)
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected. (4) Consult the dealer or an experienced radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be
used in fixed/mobile exposure condition. The min separation distance is 20cm.
Notice:
Shielded cables
All connections to other computing devices must be made using shielded cables to maintain
compliance with FCC regulations.
The following importer is the responsible party
Company Name: POWER MOBILE LIFE, LLC
Address: 400 108th Ave NE Ste 400, Bellevue, WA 98004-5541
Telephone:1-206-383-8247
This product complies with the radio interference requirements of the European
Community.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this device is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU.For the declaration of
conformity, visit the Web site
www.eufylife.com
Due to the used enclosure material, the product shall only be connected to a USB Interface of
version 2.0 or higher. The connection to so called power USB is prohibited.
A statement regarding the AC/DC adapter as disconnect device is missing in the user manual.
The statement shall require a socket outlet that is installed near equipment and that shall be
easily accessible.
The adapter shall be installed near the equipment and shall be easily accessible.
Do not use the Device in the environment at too high or too low temperature, never expose
the Device under strong sunshine or too wet environment.
The suitable temperature for the product and accessories is -20°C-50°C.
When charging, please place the device in an environment that has a normal room
temperature and good ventilation.
It is recommended to charge the device in an environment with a temperature that ranges
1817
from 5°C~25°C.
Please ensure to use only the charger offered by the manufacturer. Using unauthorized
charger may cause danger and violate the authorization of the projecter and the guarantee
article.
RF exposure information: The Maximum Permissible Exposure (MPE) level has been
calculated based on a distance of d=20 cm between the device and the human body. To
maintain compliance with RF exposure requirement, use product that maintain a 20cm
distance between the device and human body.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE
OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
Wi-Fi Operating Frequency Range:2412~2472MHz for EU;
SUB-1G Frequency range: 866-866.8MHz
This product is designed and manufactured with high quality materials and
components, which can be recycled and reused.
This symbol means the product must not be discarded as household waste, and
should be delivered to an appropriate collection facility for recycling. Proper disposal
and recycling helps protect natural resources, human health and the environment.
For more information on disposal and recycling of this product, contact your local
municipality, disposal service, or the shop where you bought this product.This device
complies with Industry Canada licence-exempt RSS standard(s). Operation is subject
to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device."
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement."
