Loading ...
Loading ...
Place Mug & Pod
Place a mug on the drip tray
plate. Lift the handle and place
any K-Cup® pod in the K-Cup® pod
holder. Lower the handle completely
to close the lid.
Do not remove the foil lid on the
K-Cup® pod.
To make an iced latte or iced
cappuccino, fill a 16oz plastic cup half
way with ice, then follow instructions above.
NOTE: For iced beverages, only use a plastic cup, do not use glass.
The COFFEE and LATTE & CAPP
buttons will blink. Press the LATTE &
CAPP button - the SHOT button and
STRONG button will illuminate. Press
the blinking brew button. The LATTE
& CAPP, SHOT, STRONG, and brew
button will all remain illuminated
while brewing – about 1 minute. Brewing is complete when the
buttons are no longer illuminated. Lift the handle and dispose
of the used K-Cup® pod. The brewer will be ready to brew
another cup in about a minute.
NOTE: After 60 seconds, the brew button will be disabled. To re-activate, lift and lower the
handle completely.
CAUTION: While brewing, there is extremely hot water in the K-Cup® pod holder. To avoid
injury, do not lift the handle during the brewing process.
Remove the frother from the base. Remove
the lid and pour the frothed milk over your
shot of coffee.
NOTE: Clean frother immediately after use. For cleaning
instructions, see Caring for your Brewer section in this guide.
2 3
4
Brew a Shot
Create Your Coffeehouse
Beverage
2
The COFFEE and LATTE & CAPP buttons
will blink. Press the COFFEE button. The
4 cup sizes will blink. Select your cup size
— for bolder coffee, press the STRONG
button before selecting your cup size. Press
the blinking brew button. The COFFEE,
STRONG (if selected), cup size, and brew button
will all remain illuminated while brewing — about
1 minute. Brewing is complete when the buttons are
no longer illuminated. Lift the handle and dispose of the used K-Cup®
pod. The brewer will be ready to brew another cup in about a minute.
NOTE: After 60 seconds, the brew buttons will be disabled. To re-activate, lift and lower the
handle completely.
CAUTION: While brewing, there is extremely hot water in the K-Cup® pod holder. To avoid
injury, do not lift the handle during the brewing process.
Brew & Enjoy!
1
Brew Your First Coffee
Place a mug on the drip tray. If using
a travel mug, remove the drip tray and
place the mug on the drip tray base. Lift
the handle and place a K-Cup® pod in
the K-Cup® pod holder. Lower the handle
completely to close the lid.
Do not remove the foil lid on the K-Cup® pod.
High Altitude Brewing: While holding the brewer
handle up, push down slowly on the K-Cup® pod
in the pod holder until the bottom of the K-Cup® pod
is punctured by the exit needle.
Place Mug & Pod
Brewer Features
Frother froths milk to create your favorite latte or cappuccino.
SHOT button brews a shot of coffee to make full-flavored, delicious lattes
and cappuccinos.
COLD button for cold frothed milk to create iced lattes and iced
cappuccinos.
Strong Brew increases your coffee strength and intensity. For bolder coffee,
press the STRONG button.
Smart Start heats then brews in one simple process. No need
to wait for the brewer to heat before selecting cup size. Power on your
brewer, place mug, insert a K-Cup® pod, and lower the handle. Then, select
your cup size and press the brew button. The brewer will heat, then
automatically begin brewing.
Auto Off automatically turns your brewer off 2 hours after the last brew for
energy savings.
To disable the Auto Off feature:
1. Power the brewer off while it is plugged in.
LATTE
CAPP
COLD
2. Press and hold the STRONG and the 10oz buttons for 3 seconds – the Auto Off
light will turn off.
3. Power the brewer on – the Auto Off light will no longer be illuminated.
To enable the Auto Off feature, repeat steps 1-3. The Auto Off light will
illuminate.
High Altitude Brewing: To ensure your brewer works properly at higher
altitudes (5,000 feet) please follow these brewing instructions and
enable the High Altitude Brewing Mode on your brewer.
Brewing Instructions - While holding the brewer handle up, push down slowly on the K-Cup®
pod in the pod holder until the bottom of the K-Cup® pod is punctured by the exit needle.
To enable High Altitude Brewing Mode:
1. Power the brewer off while it is plugged in.
2. Press and hold the STRONG and 8oz buttons for 3 seconds- both lights will blink 3 times to
confirm that the High Altitude Brewing Mode has been enabled.
To disable High Altitude Brewing Mode:
1. Power the brewer off while it is plugged in.
2. Press and hold the STRONG and 8oz buttons until the lights are no longer illuminated.
AUTO OFF
DESCALE
ADD WATER
COFFEE
SHOT
LATTE & CAPP
STRONG
8
OZ
6
OZ
10
OZ
12
OZ
1
LATTE
CAPP
COLD
2
BREW
BUTTON
AUTO OFF
DESCALE
ADD WATER
COFFEE
SHOT
LATTE & CAPP
STRONG
8
OZ
6
OZ
10
OZ
12
OZ
4
BREW
BUTTON
1
2
3
(OPTIONAL)
Loading ...
Loading ...
Loading ...