Loading ...
Remove pcking tpe from brewer nd
remove frother from plstic bg. Plug into
grounded outlet.
Plce lrge mug (12oz minimum) on the drip try.
Remove the water reservoir lid, then lift the
reservoir straight up to remove it.
Rinse reservoir with fresh water and fill to the
MAX fill line.
Replace water reservoir, making sure the lock tab
engages with the brewer. Replace lid.
NOTE: Do not use distilled water.
Press power button — the power light and AUTO
OFF light will illuminate.
The brewer will automatically begin heating the
water. This will take about 3 minutes. Once the
heating sound stops, the brewer is ready.
Lift and lower the handle. Do not insert a K-Cup®
pod. The COFFEE and LATTE & CAPP buttons will
blink. Press the 6oz button, then press the blinking
brew button to start a cleansing brew (the COFFEE
button will illuminate). Pour the hot water into the sink.
The one-time setup process is now complete and you are
ready to brew!
NOTE:
Between brew cycles, the brewer may take about a minute to reheat.
1
3 4
2
5
Before You Brew
Plug & Place
Clean the Frother
Rinse & Fill
Power On
Cleansing Brew
LATTE
CAPP
COLD
D
ES
CAL
E
A
UT
O OF
F
A
DD
W
ATER
COFFEE LATTE & CAPP
STR
ONG
10
8
6
oz
12
o
z
oz
oz
SHOT
LATTE
CAPP
COLD
STRONG
8
OZ
6
OZ
10
OZ
12
OZ
STRONG
8
OZ
6
OZ
10
OZ
Remove the lid and whisk from inside the frother. Wash
the interior of the frother, lid, and whisk with warm,
soapy water. Dry all parts thoroughly using a soft, non-
abrasive cloth, and then reassemble.
NOTE: Frother and frother lid are top rack dishwasher safe. Whisk should
be placed in the utensil basket. If washing by hand, only use non-abrasive
cleaning materials to prevent damage to the inner surface of the frother.
1
Make Your First Latte or Cappuccino
Fill Frother
To make a Hot Latte or Hot Cappuccino:
Remove lid and add chilled
milk to the LATTE or CAPP line
marked in the frother. Replace
the lid and place frother on
the frother base. Press the
LATTE or CAPP button on the
frother base. The frother will
beep once and the button will
illuminate while heating – approximately 3 minutes.
Frothing is complete when the frother beeps twice and the
light on the LATTE or CAPP button is no longer illuminated.
TIP: Having trouble frothing? We’re here to help. Give us a call at 1-866-901-BREW (2739).
NOTE: Do not under or overfill frother. Do not operate before adding milk.
CAPP line = minimum fill LATTE line = maximum fill
CAUTION: Frother is not microwave safe.
To make an Iced Latte or Iced Cappuccino:
Remove lid and add chilled
milk to the LATTE or CAPP line
marked in the frother. Replace
the lid and place frother on
the frother base. Press the
COLD button followed by the
LATTE or CAPP button. The
frother will beep once and both
buttons will illuminate while the milk
is frothing – approximately 3 minutes.
Frothing is complete when the frother beeps twice and the
light on the COLD and LATTE or CAPP buttons are no
longer illuminated.
NOTE: Do not under or overfill frother. Do not operate before adding milk.
CAPP line = minimum fill LATTE line = maximum fill
CAUTION: Frother is not microwave safe.
LATTE
COLD
CAPP
LATTE
COLD
CAPP
LATTE
CAPP
LATTE
CAPP
1
2
BREW
BUTTON
LID
WHISK
FROTHER
Loading ...
Loading ...
Loading ...