Summit CR4B23T5B 24" Wide 230V 4-Burner Radiant Cooktop

User Manual - Page 4

For CR4B23T5B. Also, The document are for others Summit models: CR4B23T6W

PDF File Manual, 28 pages, Read Online | Download pdf file

CR4B23T5B photo
Loading ...
Loading ...
Loading ...
3
WARNING: Never use your appliance for warming or heating a
room.
CAUTION: DO NOT touch Cooking Zones or areas near these
surfaces.Cooking Zones may be hot from residual heat even though they are dark
in color. Areas near the Cooking Zones may become hot enough to cause burns.
During and after use, do not touch or let clothing or other flammable materials touch
these areas until they have had sufficient time to cool.
CAUTION: Never wear loose fitting or hanging garments while using this
appliance.
Always turn off all controls when cooking is completed.
Never allow children to sit or stand on any parts of the appliance as they could be
injured or burned.
Wear proper apparel. Loose-fitting or hanging garments should never be worn
while using the appliance. Do not let clothing or other flammable materials contact
hot surfaces.
Do not use water or flour on grease fires. Smother the fire with a pan lid, or use
baking soda, a dry chemical or foam-type extinguisher.
When heating fat or grease, watch it closely. Fat or grease may catch fire if allowed
to become too hot.
Use only dry pot holders. Moist or damp pot holders on hot surfaces may result in
burns from steam. Do not let the pot holders touch hot surface units. Do not use a
towel or other bulky cloth instead of a pot holder.
Do not heat unopened food containers. Buildup of pressure may cause the
container to burst and result in injury.
ELECTRICAL SAFETY
WARNING
If the surface is cracked, switch off the appliance to avoid the possibility of
electric shock. Do not use your COOKTOP again until the glass surface has been
changed.
When using the COOKTOP, never use aluminum foil, products wrapped in
aluminum foil, or deep-frozen food in aluminum cookware.
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
The installation and connection of the new appliance must only be carried out by
qualified personnel.
Flush-mounted appliances may only be operated following installation in suitable
cabinets and workplaces which conform to the relevant standards. This ensures
sufficient protection against electric shock as required by certification agencies.
If your appliance malfunctions or fractures, switch off all cooking zones, and contact the
Service Center.
Loading ...
Loading ...
Loading ...