Smart Wi-Fi Light Switch Installation
Important Safety Information
Before installing, servicing, or removing the Smart Switch, read and follow all safety precautions
including the following:
• WARNING: RISK OF ELECTRIC SHOCK OR FIRE. Turn OFF power supply at the circuit breaker or
fuse. Use a non-contact voltage tester to ensure the power is off.
• The Smart Switch must be installed and used in accordance with the National Electric Code (NEC)
or your local electrical code. If you are unfamiliar with these codes and requirements, or are
uncomfortable performing the installation, consult a qualified electrician.
• The Smart Switch is an indoor single-pole switch that requires a neutral connection.
• Do not install the Smart Switch with wet hands or when standing on wet or damp surfaces.
1 Download TP-Link Kasa from the App Store or Google Play.
2 Connect your mobile device to a 2.4GHz Wi-Fi network.
App Store is a trademark of Apple Inc.
Google Play is a trademark of Google Inc.
3 Remove the faceplate from the Smart Switch. Launch Kasa and follow
the in-app wiring steps to install and connect the Smart Switch to your
home network.
7106506938 REV 2.0.0
OR
scan QR
code
Note: The Smart Switch
only supports 2.4GHz
networks.
ATTENTI ON:
A neutral wire is required to
install the Smart Switch.
Quick Start Guide
HS200
Add Device
Sketch 9:41 AM 100%
Smart Plug
Range Extender
RE350k
Smart Bulb
Smart Switch
Sketch 9:41 AM 100%
Let’s get started
ST ART
Kasa will guide you through the wiring
process. If you are not comfortable
with basic wiring work, please call
an electrician.
Sketch 9:41 AM 100%
DONE
Great!
Your Smart Switch is all set up. It is
now saved in your Device List.
Loading ...
