Loading ...
Loading ...
Loading ...
7
■ The place where the power cord exits the air conditioner
should be placed no more than 4 ft (122 cm) from a grounded
outlet.
■ Do not block the louvers in the front panel
■ Do not block the louvers on the outside of the air conditioner.
1. Center air conditioner in window. Check that lower rail of air
conditioner is behind and against back side of windowsill.
Lower window sash to hold cabinet in place.
NOTE: Your model may differ from the one shown.
2. Check that air conditioner cabinet is tilted to the outside so
that water will run to the outside. Place level on the top right-
hand side of air conditioner cabinet. There should be a tilt to
the outside of at least ¹⁄₂ bubble.
3. Place level on left-hand side of air conditioner and check that
cabinet is tilted properly. If cabinet is not properly positioned,
reposition or shim cabinet to provide the proper tilt.
Attach side curtains to window
1. Pull left-hand curtain out until it fits into the window channel.
Repeat with right-hand curtain.
2. Insert one of the #8 x ³⁄₄ in. slotted wood screws through left-
hand curtain and into the window channel to fasten the
curtain to the window sash.
3. Repeat for the right-hand curtain.
NOTE: Your model may differ from the one shown.
Front view
Top view
Complete Installation
1. Place window-lock bracket on top of lower window and
against upper window sash.
2. Use a ³⁄₃₂ in. drill bit to drill a starter hole though the hole in
the bracket.
3. Attach window-lock bracket to window sash with one of the
#8 x ³⁄₄ in. slotted wood screws to secure window in place.
1. Window sash
2. Lower rail behind back side of windowsill
3. Top channel
1. Level showing at least
¹⁄₂
bubble
1
2
3
1
1. Hole in #8 x
³⁄₄
in. slotted wood screw
2. Side curtain
1. Side curtain against window channel
2. Window channel
3. #8 x
³⁄₄
in. slotted wood screw
1. Upper window sash
2. Window-lock bracket
1
2
3
1
2
1
2
Loading ...
Loading ...
Loading ...