Loading ...
Loading ...
Loading ...
4
INSTALLATION REQUIREMENTS
Tools and Parts
Check that you have everything necessary for correct installation.
Proper installation is your responsibility.
Tools needed
Parts supplied
Check that all parts are included in parts package.
Location Requirements
IMPORTANT: Observe all governing codes and ordinances.
Check the location where the air conditioner will be installed.
Proper installation is your responsibility. Make sure you have
everything necessary for correct installation.
The location should provide:
■ Grounded electrical outlet within 4 ft (122 cm) of where the
power cord exits the air conditioner.
NOTE: Do not use an extension cord.
■ Free movement of air to rooms to be cooled.
■ A large enough opening for the air conditioner. Installation
parts are supplied for double-hung windows.
■ Adequate wall support for weight of air conditioner. Air
conditioner weighs 51 lbs (23 kg) to 53 lbs (24 kg).
NOTES:
■ Do not install the air conditioner in an area where the front
panel will be exposed to heat sources that will raise the
panel surface temperature above 120°F (50°C).
■ Cabinet louvers must not be obstructed. Air must be able
to pass freely through the cabinet louvers.
■ Your model may differ from the one shown.
Window Installation
Window opening measurements:
■ 25 in. (63.5 cm) minimum to 38 in. (96.5 cm) maximum
opening width
■ 14 in. (35.6 cm) minimum opening height
■ Safety glasses ■ Tape measure
■ Flat-blade and Phillips
screwdrivers
■ Drill and ³⁄₃₂ in. or smaller
bit
■ Scissors ■ Utility knife
■ Level
1. 1 window-lock bracket
2. 6 - #8 x
³⁄₈
in. round-head screws
3. 1 foam adhesive sealer
4. 3 - #8 x
³⁄₄
in. wood screws
5. 1 top channel
6. 1 foam seal
7. 2 side curtains
1
4
3
2
5
6
7
1. Cabinet louvers
A. 25 in. (63.5 cm) minimum
B. 14 in. (35.6 cm) minimum
1
A
B
Loading ...
Loading ...
Loading ...