Loading ...
Loading ...
Loading ...
68
DCR-HC36/HC46/HC96
2-659-813-11(1)
E:\SONY\2659813111\01US04MEN.fm
• During Easy Handycam operation, you can set
[DATE/TIME] only.
• For DCR-HC96:
appears for a picture recorded using a flash.
B AUTO
Displays the remaining tape indicator for
about 8 seconds in situations such as those
described below.
• When you set the POWER switch to PLAY/
EDIT or CAMERA-TAPE with a cassette
inserted.
• When you touch (Play/Pause).
ON
Always displays the remaining tape
indicator.
The default setting is [ON], allowing you to
use the supplied Remote Commander
(p. 40).
• Set to [OFF] to prevent your camcorder from
responding to a command sent by another VCR
remote control unit.
The camera recording lamp will not light up
during recording when you set this to [OFF]
(The default setting is [ON]) (p. 35).
B ON
A melody sounds when you start/stop
recording, or operate the touch panel.
OFF
Cancels the melody.
B LCD PANEL
Shows displays such as the time code on
the LCD screen and in the viewfinder.
V-OUT/PANEL
Shows displays such as the time code on
the TV screen, LCD screen, and in the
viewfinder.
B NORMAL
Scrolls the menu items downwards by
touching .
OPPOSITE
Scrolls the menu items upwards by
touching .
B 5 min
The camcorder is automatically turned off
when you do not operate your camcorder
for more than approximately 5 minutes.
NEVER
The camcorder is not automatically turned
off.
• When you connect your camcorder to a wall
outlet, [A.SHUT OFF] is automatically set to
[NEVER].
See page 130.
REMAINING
REMOTE CTRL (Remote control)
REC LAMP (Recording lamp)
(DCR-HC96)
BEEP
DISP OUTPUT
MENU ROTATE
A.SHUT OFF (Auto shut off)
CALIBRATION
STANDARD SET menu (Continued)
Loading ...
Loading ...
Loading ...