Loading ...
Loading ...
Loading ...
OPERATION
Appliance description
14 | CNS S | CNS U www.stiebel-eltron.com
2.2 General safety instructions
Operate the appliance only when fully installed and with all safety
equipment fitted.
!
WARNING Injury
- Keep children under the age of3 away from the
appliance if constant supervision cannot be guar-
anteed.
- Children from the age of 3 to 7 may switch the ap-
pliance on and off, provided they are supervised
or have been instructed in the safe operation of
the appliance and understand any risks that may
result. This is subject to the appliance having been
installed as described. Children from the age of 3 to
7 must not plug the power cable into its socket nor
regulate the appliance.
- The appliance may be used by children aged8 and
older and persons with reduced physical, sensory
or mental capabilities or a lack of experience and
know-how, provided that they are supervised or
they have been instructed on how to use the appli-
ance safely and have understood the resulting risks.
- Children must never play with the appliance. Chil-
dren must never clean the appliance or perform
user maintenance unless they are supervised.
WARNING Burns
Never operate this appliance...
- in rooms where the appliance is at risk of fire or
explosion as a result of chemicals, dust, gases or
vapours.
- in the direct proximity of pipes or receptacles that
carry or contain flammable or explosive materials.
- if work such as laying cables, grinding or sealing is
carried out in the installation room.
- if sprays, floor polish or similar products containing
napsan are used. Vent the room sufficiently before
heating.
- if the minimum clearances to adjacent object sur-
faces are not maintained, for example to furniture,
net curtains, curtains, textiles or other flammable
materials.
- if an appliance component is damaged, the appli-
ance has fallen over or already had a fault.
WARNING Burns
Never place any flammable, combustible or insulating
objects or materials, such as laundry, blankets, maga-
zines, containers with floor polish or napsan, spray cans
or similar on the appliance or in direct proximity to it.
WARNING Burns
Parts of the appliance can get very hot and may cause
burns. Particular caution is advised when children or
vulnerable persons are present.
WARNING Overheating
In order to avoid overheating, do not cover the heater.
!
Material losses
Never step on the appliance.
2.3 Test symbols
See type plate located on the right on the exterior of the appliance.
3. Appliance description
The appliance is a wall mounted electric direct heater.
The appliance is suitable as a full heating system in bathrooms,
for example, or for use between seasons and as a booster heater
in smaller rooms, such as hobby and guest rooms.
The air in the appliance is heated by a heating element and ex-
pelled via natural convection through the air outlet grille at the
top. Cool room air flows in through the apertures at the bottom
of the appliance.
3.1 Series CNS-S
After mounting the appliance on the wall and making the elec-
trical connection using a mains plug, the appliance is ready for
operation.
3.2 Series CNS-U
After mounting the appliance on the wall and making the electri-
cal connection using a permanent power supply via an appliance
socket, the appliance is ready for operation.
4. Operation
4.1 Description of the user interface
Switch the appliance ON via the switch on the r.h. side of the
appliance.
Set the required room temperature via the continuously vari-
able temperature selector (for temperatures see specification
chapter).
26_07_31_0037
As soon as the selected room temperature is reached, it is con-
stantly maintained at this selected temperature through periodic
heating (the output of the appliance must correspond at least to
the required heat demand of the room).
If several appliances are installed in a single room, the setting
at the temperature selector on each appliance can be different.
Note
To avoid excessive power consumption when windows
are open, switch the appliance off while airing.
Loading ...
Loading ...
Loading ...