Loading ...
Loading ...
Loading ...
9-5
9
Troubleshooting
DC120 Camera
Problem Cause Solution
Picture is too dark. Flash is not on or did
not go off.
Turn on the flash. See
the “Flash” section in
Chapter 2 - Using
Your DC120.
The subject is too far
away for the flash to
have an effect.
Move so there is no
more than 16.4 feet
(5 m) between the
camera and the
subject.
The subject is in front
of a bright light.
Change your position
so the light is not
behind the subject.
Picture is too light. The flash is not
needed.
Change to automatic
flash. See the “Flash”
section in Chapter 2 -
Using Your DC120.
The subject is too
close when the flash
was used.
Move so there is at
least 2.3 feet (0.7 m)
between the camera
and the subject.
The light sensor is
covered.
Hold the camera so
your hands or other
objects do not cover
the light sensor.
Stored pictures are damaged. The memory card was
inserted or removed
when the Ready light
was blinking.
Make sure the Ready
light is not blinking
before inserting or
removing the memory
card.
Pictures remaining number
does not decrease.
The image resolution
does not take up
sufficient space to
decrease the picture
remaining number.
Continue taking
pictures.
Loading ...
Loading ...
Loading ...