Loading ...
Loading ...
Loading ...
o Keep a minimum of 50 mm between your freezer and the back
wall. There should also be a gap of 25 mm either side and 50
mm clear space above the freezer. If there is insufficient space
this can create the sound of vibration, weakening of the
appliance’s power and a waste of electricity.
o The appliance should never be placed upside down or carried in a
horizontal position.
o Your appliance should not be located in direct sunlight or
exposed to continuous heat or extremes of temperature (e.g.
next to a radiator or boiler). If this is not possible, then you
should install an insulation plate between the appliance and the
adjacent heat source.
o You should check whether there is an electrical socket available,
which will be accessible after your appliance is installed.
o Place the appliance flatly and firmly on a solid base. The
appliance is fitted with adjustable feet on the front side, which
can be used to level the appliance.
o If the front of the appliance is positioned slightly higher than the
rear, the door can be opened and closed more easily.
o If your freezer tilts down to the left, turn the
left adjusting leg until the appliance is level.
o If your freezer tilts down to the right, turn
the right adjusting leg until the appliance is
level.
o Be sure to leave enough space for the
opening of the door, to avoid damage to the
appliance or personal injury.
21
Loading ...
Loading ...
Loading ...