Loading ...
Loading ...
Loading ...
13
The delay start light will flash to indicate the delay time. You can delay the start time of the cycle from
1 - 24 hours.
Set Wash program, Press Delay to set the number of hours to delay wash cycle, then push Start/Pause.
To cancel the delay time, press Delay button until time shows 0H.
g. Temp.: Press [Temp.] to set your desired washing temperature.
Press button to set desired wash temp (Hot+, Hot, Warm, Eco, Cold)
h. Spin: Press [Spin] to increase spin speed.
Washer drum spins at a speed up to 1300 RPM which reduces drying time and saves energy.
Press the button until desired speed is lit (No Spin, Low, Med, High, Highest).
Some fabrics (i.e. delicates) require a slower spin speed.
High spin speeds are not available on all cycles.
i. Soil: Press [Soil] to increase time for heavier soiled items.
There are three (3) soil levels options.
Each bar increases the base wash time by 15 minutes.
j. Dry Level: Press the Dry button continuously to choose the dry level: Extra Dr
y/Normal Dry/Gentle Dry.
k. Child Lock: Press [Delay] and [Temp] at the same time for 3 seconds to Unlock/Lock the control panel.
On/Off Button will still function.
l. Extra Rinse: Press the [Temp.] and [Spin] button at the same time to add an extra rinse to the selected cycle.
m. My Cycle: After a wash cycle is modified, hold down [Spin] to save your settings.
You can quickly choose this cycle for your next wash by turning the dial to My Cycle.
Override saved settings by holding the [Spin] button down again after a different cycle and options are
selected.
n. Sound: Press the [Soil] button for 3 seconds to turn the sound on or off.
Figure 14
DISPLAY (FOR MCSCWD27W5/MCSCWD27S5/MCSCWD27G5 ONLY)
ePress 3 sec. to set My Cycl
a
d e f g
b
c
Loading ...
Loading ...
Loading ...