Loading ...
Loading ...
Loading ...
17
is not activated.
In order to activate the charcoal filter
saturation indicator, press buttons E
and F simultaneously for 3 seconds.
Initially, only letter F will be displayed,
then after the 3 seconds have passed,
letter C will be displayed as well,
indicating that the carbon filter
saturation control system is active.
To switch off the system, re-press the
same two buttons: letter C appear on
display and after 3 seconds it
disappears and the device will be
switched off.
E - Knob to decrease the speed: from
boost speed P to speed level 1.
F - Knob to increase (standby) speed to
boost speed P.
Attention! Boost speed P lasts 5
minutes after which the cooker hood
automatically sets the speed to level 2
(suction power).
Controlling the range hood with
sliding glass:
Closing the glass, all selected speed and
lights switched off.
Hood retains last speed (except P-boost-
speed) setting when glass is closed and re-
opened.
If the hood fails to operate correctly, briefly
disconnect it from the mains power supply for
almost 5 sec. by pulling out the plug. Then
plug it in again and try once more before
contacting the Technical Assistance Service.
Warning!
Always press the fan off button A before
disconnecting the hood from the mains
supply.
Reset filter saturation signal
Press knob B for about 3 seconds.
The letter F and/or C will disappear from the
display.
Loading ...
Loading ...
Loading ...