Loading ...
Loading ...
Loading ...
14
.......apply the two bigger brackets (lower
brackets) under the first two and....
..... tighten securely the two screws on
upper brackets, check that blower
housing is now well blocked, then, from
the inside of the hood, fix definitively the
lower brackets with one screw each.
10. Refinish the installation to cabinet with
two fixing screws.
For Ductless (recirculating)
installations
Cabinet without ceiling ONLY:
Install the deflector (available as an extra
kit) on the transition - snap into place.
11. Connect ducting to transition. Seal with
duct tape.
Do not use duct smaller than the
transition.
For Ductless - recirculating -
installations:
Cabinet with ceiling ONLY:
provide and install a section of duct long
enough to connect hood transition to
deflector once this has been installed
onto the cabinet ceiling (the deflector is
available as an extra kit).
Loading ...
Loading ...
Loading ...