Precor EFX 222 User Manual

Loading ...

Assembling the Equipment

3. Tilt the console bracket forward and feed the cable up through the top of the

console bracket.

Note: Use the hole on the back of the console bracket to reach the cable and

help guide it toward the top opening in the bracket.

Figure 8: Tilt console bracket forward

4. Reposition the console bracket to its upright position and make sure all wires

are pulled through the top of the bracket.

5. Insert the top M8 x 12 mm buttonhead screw and M8 lock washer and

partially tighten the fastener. Then, insert the bottom two buttonhead screws

and lock washers and partially tighten these fasteners.

Figure 9: Right stabilizer attachment

6. Attach the opposite side of the console bracket to the left stabilizer using the

three remaining M8 x 12 mm buttonhead screws and M8 lock washers. Fully

tighten all six console bracket fasteners using the 5 mm hex key.

Figure 10: Left stabilizer attachment

7. Install the plug over the hole in the console bracket.

Note: Use a rubber mallet to tap the plug gently into place.

Figure 11: Replace the plug

Loading ...

Precor EFX 222 Energy Series Elliptical Crosstrainer