Loading ...
Loading ...
Loading ...
Report No. 141015030GZU-001
Sinsion Technology Industrial Co., Ltd
Page 11 of 33
Issued: 8-Jan-2015
Revised: None
Photo #
Item
no.
1
Name
Manufacturer/
trademark
2
Type / model
2
Technical data and securement
means
Mark(s) of
conformity
3
4.0 Critical Components
HUIZHOU WOTE
ADVANCED
MATERIALS CO
LTD
2100-FR615
For HB-1102 only. ABS material.
Rated V-0, HWI=3, HAI=1, CTI=1,
60 ℃, minimum 1.6 mm thick.
Overall measured Ф110 mm x Ф
98.5 mm x 121.5 mm.
cURus
Various Various
For HB-1103, HB-1102A only.
SUS201 material. Minimum 0.4
mm thick, overall measured Φ110
mm x Φ98.5 mm x 121.5 mm for
HB-1102 A, Φ113 mm x Φ99 mm
x 199 mm for HB-1103.
NR
6 14 Upper Enclosure
HUIZHOU WOTE
ADVANCED
MATERIALS CO
LTD
2100-FR615
ABS material. Rated V-0, HWI=3,
HAI=1, CTI=1, 60 ℃, minimum
1.6 mm thick. Overall measured Ф
103 mm x 61.5 mm.
cURus
3 15 Driving Coupler RTP CO
RTP PA66 30
GF FR0 BLK
PA6/6 material. Rated V-0, 105
℃, minimum 0.8 mm thick.
cURus
2 16 Cup
NINGBO LG
YONGXING
CHEMICAL CO
LTD
80HF
SAN material. Rated HB, 50 ℃,
minimum 1.5 mm thick. Overall
measured Ф86.5 mm x Ф68.5
mm x 157.5 mm long for blender,
measured Φ86.5 mm x Φ68.5 mm
x 102 mm long for coffee mill.
Both cups are marked max. line
on the side.
cURus
1 17 Cutter Base Various Various Consisted of following parts. cURus
1 17a Coupler Match
Dongguan AMG
Electronics Ltd
GTP-(X)
Silicone Rubber, rated V-0, 105
℃, minimum 0.5 mm thick.
cURus
1 17b Plastic Base RTP CO
RTP 20(o) FR
XC
Rated V-0, 105 ℃, minimum 0.75
mm thick. Measured Ф84.5 mm x
38.5 mm.
cURus
1 17c Shaft Various Various
SUS303 material. Measured Ф6.0
mm x 31.5 mm long.
NR
1 17d Blade Various Various
SUS301 material. Measured 1.0
mm thick.
NR
1 17e Shaft Seal Ring
3M CHINA CO
LTD
5516-ST
Silicone. Rated V-0, 105 ℃,
minimum 0.5 mm thick.
cURus
1 17f Cup Seal Ring
Dongguan AMG
Electronics Ltd
GTP-(X)
Silicone Rubber, rated V-0, 105
℃, minimum 0.5 mm thick.
cURus
418
Marking Label
(Not Shown)
Various Various
For ABS and stainless steel
surface. Rated min. 70 ℃.
cURus
13 Side Enclosure
3) Indicates specific marks to be verified, which assures the agreed level of surveillance for the component. "NR" - indicates Unlisted and
only visual examination is necessary. "See 5.0" indicates Unlisted components or assemblies to be evaluated periodically refer to section
5.0 for details.
1) Not all item numbers are indicated (called out) in the photos, as their location is obvious.
2) “Various“ means any type, from any manufacturer that complies with the "Technical data and securement means" and meets the "Mark(s)
of conformity" can be used.
NOTES:
6
ED 16.3.15 (1-Jan-13) Mandatory
Loading ...
Loading ...
Loading ...