Loading ...
Loading ...
Wine Column Refrigeration Installation & Operation Manual
3 Printed in USA
IMPORTANT!
Read and understand all information in this manual before attempting the installation.
All electrical work must be performed by a qualied technician and
conform to all applicable state and local codes.
SAFETY
PLEASE READ all instructions completely
before attempting to install or operate the unit.
Take particular note of the DANGER, WARNING
an CAUTION information in the manual. The
information is important for the safe and ecient
installation, operation and care of your Perlick unit.
DANGER
Indicates a hazard that WILL
result in serious injury or
death if precautions are not followed.
W ARNING
Indicates a hazard MAY
cause serious injury or
death if precautions are not followed.
CAUTION
Indicates a hazard where
minor injury or product
damage may occur if precautions are not
followed.
NOTICE
Indicates that property
damage may occur if
warnings or instructions are not followed.
W ARNING
Carefully inspect the cabinet
for hidden damage. If
damage is discovered, le your claim immediately
with the transportation company. Perlick is not
responsible for damage in transit.
CAUTION
When moving the unit, be
sure to protect finished
ooring with appropriate material to avoid
damage from moving the appliance.
CAUTION
If unit has been laid on its
back or sides, place unit
upright and allow minimum of 24 hours before
connecting the unit. Failure to do so can aect
the function and performance of the appliance.
This appliance should be installed in a dry,
ventilated indoor location. The ambient
temperature of the location must be between
55°F (13°C) and 100°F (43°C) for optimal
performance.
When fully stocked, Perlick wine column refrig-
eration is very heavy. To ensure safety and pre-
vent home damage, the load-bearing capacity
of your oor must be 550 lbs for each CC24W
column being installed.
This product must be installed on a level oor
for safety and optimal performance. The base
must be at to ensure anti-tip brackets properly
function and that the refrigeration system is lev-
el. Any walls and surrounding furniture/xtures
need to be securely attached to the oor, wall
studs or concrete prior to installing the column.
To ensure proper performance, the air intake
(toe kick) must not be blocked. Perlick refrigera-
tion is front-breathing, and covering the intake
will cause the system to overheat and fail.
SITE PREPARATION
Loading ...
Loading ...
Loading ...