Loading ...
Loading ...
Loading ...
Wine Column Refrigeration Installation & Operation Manual
Printed in USA 18
INSTALLING AIR FILTERS
Carbon Air Filter
The carbon air lters should be placed on the
perforated panel located in the top-rear of the
cabinet.
NOTE: The top wine rack will need to be removed
to access the lter.
1. Remove the lter from the plastic bag
before installing into the unit. Do not open or
puncture the tyvek bag.
2. To lower the carbon air lter panel, pull rmly.
3. Place the carbon air lter directly onto
the panel and close panel - push rmly to
engage closure clips.
4. It is recommended that the carbon lter be
replaced every 6 months.
A
DETAIL A
SCALE 1 : 4
CARBON AIR FILTER PANEL
CARBON AIR FILTER (BETA UNITS)
The carbon air filters should be placed on the perforated panel located in the
top-rear of the cabinet.
1. Remove the filter from the plastic bag before installing into the unit. Do not
open or puncture the tyvek bag.
2. To lower the carbon air filter panel, turn the finger screw 1/4 turn.
3. Place the carbon air filter directly onto the panel and fasten securely to the top
with the finger screw.
Note: Wine models require top wine racks to be removed to access panel.
SW
THIS DOCUMENT/PUBLICATION/SOFTWARE/DRAWING CONTAINS PROPRIETARY INFORMATION WHICH IS THE PROPERTY OF THE PERLICK CORPORATION. IT MAY NOT BE REPRODUCED OR TRANSMITTED IN ANY FORM, ELECTRONIC
OR MECHANICAL, INCLUDING PHOTOCOPYING, RECORDING, OR USED IN ANYINFORMATION STORAGE, TRANSMISSION, OR RETRIEVAL SYSTEM, WITHOUT WRITTEN PERMISSION FROM THE PERLICK CORPORATION
COPYRIGHT 2001 PERLICK CORPORATION. ALL RIGHTS RESERVED.
Milwaukee, WI 53223
DRAWN
Perlick Corporation
SCALE
1:20
DATE
Loading ...
Loading ...
Loading ...