Loading ...
Loading ...
Loading ...
9
5. Slide the Seat (23) to the front of the Rail (2).
Next, attach a Stop (32) to each side of the Rail
(2) with an M4 x 19mm Screw (69).
Then, attach the Rail Cap (38) to the Rail (2)
with two M4 x 19mm Screws (69).
6. While a second person holds the Upright (77)
near the Frame (1), connect the Neck Wire (112)
to the Main Wire (84).
Tip: Avoid pinching the wires. Attach
the Upright (77) to the Frame (1) with four
M8 x 35mm Screws (82); start all the Screws,
and then tighten them.
7. Loosen and remove the Handle (78) from the
Upright (77). Note: The Handle functions like a
ratchet. Turn the Handle in the desired direction,
pull it outward, turn it in the opposite direction,
push it inward, and then turn it in the desired
direction again. Repeat this process as many
times as necessary.
Next, identify the Right and Left Upright Covers
(80, 81), and orient them as shown.
Tip: Avoid pinching the wires. Press the Right
and Left Upright Covers (80, 81) together around
the Upright (77), and attach them to the Upright
with two M4 x 16mm Screws (68).
Then, insert the Handle (78) into the Right
Upright Cover (80) and tighten it into the
Upright (77).
2
5
6
7
38
69
69
32
32
23
69
82
81
80
77
68
68
78
69
Avoid
pinching
the wires
Avoid pinching
the wires
84
112
77
1
Loading ...
Loading ...
Loading ...