Loading ...
07-02284A 2 LBG Distribution
SAFETY WARNINGS
For the safe operation of this machine,
follow the instructions given in this
booklet. Failure to do so can result in
personal injury and/or damage to
machine and property!
WARNING! Do not alter or
modify your unit in any way.
Use only replacement parts
authorized by LBG Distribution.
Modifications or use of unapproved
parts could create a hazard and will
void your warranty. Contact your
authorized distributor for assistance
WARNING! Electric shock
hazard, rotating fan, hot surface
hazards. Unplug unit before
opening cover for cleaning or servicing.
Unit must be grounded.
Inspect the power cord before use. If
cord is damaged, do not use. Always
grasp the plug (not the cord) to unplug.
Insert three-prong plug on power cord
into a matching electrically grounded
outlet. Do not use adapter. Never cut
off third prong. Do not use an extension
cord.
The unit must be operated on a
115V/60Hz circuit protected by a
Ground Fault Circuit Interrupter (GFCI)
device.
Keep motor and wiring dry.
Do not attempt to repair the unit. For
Authorized Service Centers, contact LBG
Distribution.
GROUNDING INSTRUCTIONS
This machine must be grounded.
If it should malfunction or break
down, grounding provides a path of least
resistance for electric current to reduce
the risk of electric shock. This machine
is equipped with a cord having an
equipment-grounding conductor and
grounding plug and must be plugged into
a GFCI-protected outlet. Do not use with
an extension cord.
WARNING
Improper connection of the
equipment-grounding conductor
can result in a risk of electric shock.
Check with a qualified electrician or
service person if you are in doubt as to
whether the outlet is properly grounded.
Do not modify the plug provided with the
machine. If it will not fit the outlet,
have a proper outlet installed by a
qualified electrician.
Control Panel Guide
ON/OFF. Press to turn the unit on or off. When the machine is
turned on, the display normally reads PLEASE WAIT COMP. DELAY and
performs a numeral countdown for a maximum of 60 seconds to 0. This
delay allows time for refrigerant pressures to equalize for easier
starting. Once the unit completes the compressor delay, the display
shows UNIT ON XX HRS and cycles between INLET XX°F and INLET XX%.
NOTE: If no compressor delay countdown is displayed, a delay is not
necessary and the machine will begin operation immediately.
DISPLAY MENU. Press to cycle through the display of additional
dehumidifier conditions and User Settings. To return to the main menu,
press the ON/OFF key once.
MENU SELECTION. Press to change the values of the "User Defined"
settings. The MENU SELECTION key acts as the UP key for adjusting the
setpoint for Humidistat mode operation. See User Settings Menu
(below) for details.
PURGE. Press to empty water from the condensate pump reservoir.
The display will read PUMP PURGING with a numeral countdown.
NOTE: During normal operation, the pump purges automatically.
ON/OFF
Press and release to turn unit
on or off.
DISPLAY MENU
Press to select next item in menu.
Menu item will show in display.
MENU SELECTION /
UP KEY
Press to toggle or select values in
menu displayed.
PURGE PUMP
Press and release to start purge.
Display will count down seconds
remaining until purge is complete.
CONTROL PANEL
ON/OFF
DISPLAY
DISPLAY
MENU
MENU SELECTION /
UP KEY
PURGE PUMP
Loading ...
Loading ...
Loading ...