Loading ...
Loading ...
Loading ...
40
TROUBLESHOOTING AND USEFUL INFORMATION
MFP driver cannot be installed
(Windows 2000/XP)
If the MFP driver cannot be installed in Windows
2000/XP, follow these steps to check your computer's
settings.
1
Click the [start] button and then click
[Control Panel].
In Windows 2000, click the [Start] button, select
[Settings], and then click [Control Panel].
2
Click [Performance and Maintenance]
and then click [System].
In Windows 2000, double-click the [System] icon.
3
Click the [Hardware] tab and then
click the [Driver Signing] button.
4
Check the settings for "What action
do you want Windows to take?" ("File
signature verification" in Windows
2000).
If the [Block] has been selected, it will not be
possible to install the MFP driver. To select
[Warn] and then install the MFP driver, see
"INSTALLING THE SOFTWARE" (page 7).
Plug and play screen does not
appear (when using a USB cable)
If the Plug and Play screen does not appear after you
connect the machine to your computer with a USB
cable and turn on the machine, follow the steps below
to verify that the USB port is available.
1
Click the [start] button, click [Control
Panel], and then click [Performance
and Maintenance].
In Windows 98/Me/2000, click the [Start] button,
select [Settings], and then click [Control Panel].
2
Click [System], click the [Hardware]
tab, and click the [Device Manager]
button.
"Universal Serial Bus controllers" will appear in
the list of devices.
3
Click the icon ( ) beside "Universal
Serial Bus controllers".
Two items should appear: your controller chipset
type and Root Hub. If these items appear, you
can use the USB port. If the "Universal Serial Bus
controllers" shows a yellow exclamation point or if
the above two items do not appear, you must
check your computer manual for USB
troubleshooting or contact your computer
manufacturer.
4
Once you have verified that the USB
port is enabled, see "INSTALLING
THE SOFTWARE" (page 7) to install
the MFP driver.
• In Windows 98/Me, double-click the
[System] icon and click the [Device
Manager] tab.
• In Windows 2000, double-click the
[System] icon, click the [Hardware] tab,
and click the [Device Manager] button.
• If the [System] icon does not appear in
Windows Me, click [view all Control Panel
options].
Note
Pegasus-E_Setup_Eng.book 40 ページ ２００５年１月１４日 金曜日 午前１０時３０分
Loading ...
Loading ...
Loading ...