Loading ...
Loading ...
Loading ...
Black plate (242,1)
北米Model "A1300BE-C" EDITED: 2017/ 2/ 22
Climate control/Automatic climate control operation (type B and C)
Automatic climate control
operation (type B and C)
When this mode is selected, the fan
speed, airflow distribution, air-inlet control,
and air conditioner compressor operation
are automatically controlled. To activate
this mode, perform the following.
1. Press the AUTO button. The indicator
light “FULL AUTO” on the multi-function
display (color LCD) illuminates.
2. Set the preferred temperature using
the temperature control dial.
NOTE
. Operate the automatic climate con-
trol system when the engine is running.
. Even when cooling is not necessary,
the air conditioner compressor will
automatically turn on if the temperature
is set much lower than the current
outlet air temperature. Even in this
case, the “A/C” indicator light on the
control panel illuminates.
. The controllable temperature range
may vary depending on the regional
specifications of the vehicle.
. If you operate any of the buttons on
the control panel other than the ON/
OFF button, rear window defogg er
button, SYNC button and temperature
control dial(s) during FULL AUTO
mode operation, the “FULL” indicator
light on the multi-function display (col-
or LCD) will turn off and the “AUTO”
indicator light will remain illuminated.
You can then manually control the
system as desired using the button
you operated. To change the system
back to the FULL AUTO mode, press
the AUTO button.
To turn off the climate control system,
press the ON/OFF button. Then the air
inlet selection will be set to the following.
. When the air inlet selection is set to
auto mode: Outside air circulation
. When the air inlet selection is set to
manual mode: No change
& Sensors
The sensors are located as follows.
1) Interior air temperature sensor
2) Solar sensor
The automatic climate control system
employs several sensors. These sensors
4-6
Loading ...
Loading ...
Loading ...