Loading ...
Loading ...
Loading ...
Black plate (118,1)
北米Model "A1300BE-C" EDITED: 2017/ 2/ 22
Keys and doors/Keyless access with push–button start system
. Press the push-button ignition
switch if you do not know the proce-
dure in which the keyless access
function was disabled.
– When disabling by operating the
driver’s door: a chirp will not be
heard
– When disabling by operating the
access key fob: a chirp will be heard
& Selecting audible signal op-
eration
Using an electronic chirp, the system will
give you an audible signal when the doors
lock and unlock. If desired, you may turn
the audible signal off. For more details,
contact a SUBARU dealer.
NOTE
For models with the combination meter
display (color LCD), the setting can be
changed by operating the combination
meter display (color LCD). For details,
refer to “Vehicle Setting” F3-43.
& Warning chimes and warning
indicator
The keyless access with push-button start
system sounds a warning chime and
flashes the access key warning indicator
on the co mbination meter in order to
minimize improper operations and help
protect your vehicle from theft.
For details, refer to “Warning chimes and
warning indicator of the keyless access
with push-button start system” F3-25.
& When access key fob does
not operate properly
Refer to “Access key fob – if access key
fob does not operate properly” F9-18.
& Replacing battery of access
key fob
Refer to “Replacing battery of access key
fob” F11-45.
& Replacing access key fob
Access key fobs can be replaced at
SUBARU dealers. For more details, con-
tact a SUBARU dealer.
& Certification for keyless ac-
cess with push-button start
system
. U.S.-spec. models
FCC ID: HYQ14AHK
FCC ID: Y8PFJ16-1
FCC ID: Y8PSSPIMB02
CAUTION
FCC WARNING
Changes or modifications not ex-
pressly approved by the party re-
sponsible for compliance could void
the user’s authority to operate the
equipment.
NOTE
This device complies with part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This de-
vice may not cause harmful interfer-
ence, and (2) this device must accept
any interference received, includi ng
interference that may cause undesired
operation.
2-16
Loading ...
Loading ...
Loading ...