Loading ...
Loading ...
Loading ...
Driving
WARNING
●
Bef
ore each journey with the tow hook fit-
ted, make sure that it is correctly adjusted
and attached in its housing.
●
If the tow hook is not properly fitted and
attached, do not use it.
●
Do not use the towing bracket device for
towing if it is damaged or has missing parts.
●
Do not modify or adapt the towing device
connection.
●
Never unhook the tow hook while the
trailer is hitched.
CAUTION
●
Handl
e the tow hook with care in order to
avoid damaging the bumper paintwork.
●
The top part of the hook housing is
greased
›››
Fig. 176
3
. When using the de-
vice
, make sure that it has not been re-
moved.
Note
●
Cont
act a specialised workshop if you
lose your key.
●
Towing the vehicle with the tow hook
›››
page 51.
Placing in the standby position
Fig. 177
Tow hook reserve position
Fig. 178 Reserve position: position verification
Before assembling it, place the tow hook in
the st
andby position with the following two
steps.
●
Insert and turn the key in the direction of the
arrow
›››
Fig. 177
1
until the hole in the key
f
aces upwards (arrow).
●
Grab the tow hook under the protective
cover.
●
Press the release bolt
›››
Fig. 177
B
in the
dir
ection of arrow
2
, while pressing lever
C
in the direction of arrow
3
as far as it will go.
●
The lever will remain blocked in this posi-
tion.
V
erification of the reserve position
●
Key
›››
Fig. 178
A
is in the released position
(the k
ey hole is facing upwards).
●
The release bolt
›››
Fig. 178
B
can be
mo
ved.
264
Loading ...
Loading ...
Loading ...