Loading ...
Loading ...
Loading ...
Help with parking and manoeuvring
Change from reduced view to full view
●
Select reverse gear.
●
OR: on v
ehicles fitted with reverse assist
(Rear View Camera “RVC”) click on the car
icon of the reduced display.
Switch to the reverse assist image (Rear
View Camera “RVC”)
●
Select reverse gear.
●
OR: press the RVC function button.
Setting the indications and audio signals
The indications and audio signal settings are
in the infotainment system
›››
page 88.
●
Rear volume: volume in the rear area.
●
Rear sound settings/treble: sound
tone in the rear area.
●
Lower volume: when the parking aid is
switched on, the volume of the audio source
will be reduced, depending on the selected
option.
Error messages
If a an error or fault message appears on the
instrument cluster in Park Assist, there is a
fault.
If the fault doesn't disappear before discon-
necting the ignition, it will not be indicated
next time the parking aid is connected.
If there is a fault in a sensor, the symbol is
displayed on the infotainment system display.
We recommend taking the vehicle to a speci-
alised workshop to have the fault repaired.
Towing device
In vehicles equipped with a towing bracket
device from the factory, when the trailer is
connected, the parking aid will not be activa-
ted when reverse gear is engaged.
Visual indication segments
Fig. 173 Parking aid view on the Infotainment
syst
em display.
The distance to the obstacles can be estima-
t
ed with the help of the segments at the rear
of the vehicle.
The optical indication of the segments works
as follows:
White segments: the obstacle is more
than approx. 30 cm away from the path
or in the direction opposite to travel.
They are also displayed when the elec-
tronic parking brake is activated.
Yellow segments: the obstacles lie on
the vehicle’s path and are at a distance
of less than approx. 30 cm away.
Red segments: obstacles are less than
approx. 30 cm away.
Whenever the obstacle is located in the vehi-
cle’s direction of travel, the corresponding
audible warning will sound.
As the vehicle approaches an obstacle, the
segments are displayed closer to the vehicle.
When the penultimate segment is displayed,
this means that the vehicle has reached the
collision zone. In the collision zone, the obsta-
cles are represented in red (including those
out of the path). Do not continue to reverse
›››
in Introduction on page 247,
›
››
in
Intr
oduction on page 248!
–
–
–
253
Loading ...
Loading ...
Loading ...