Loading ...
Loading ...
Loading ...
43Cucina
Solution
Check whether the lid has proplerly locked into place
on the bowl with a click and whether the blender cap
has been properly assembled onto the motor unit
(see page 10). All functions except the blender can
only be used when the blender cap is attached to the
motor unit.
If both the blender jar and the food processing bowl
have been mounted correctly, only the blender will
work. If you want to use the food processing bowl,
remove the blender jar and assemble the blender cap
onto the motor unit (see page 10).
The thermal safety cut-out has probably cut off the
power supply to the appliance because it has
overheated. 1) Unplug the appliance. 2) Let the
appliance cool down for 60 minutes. 3) Put the mains
plug in the socket. 4) Switch the appliance on again.
Check whether the blender cap has been properly
assembled onto the motor unit (see page 10). All
functions except the blender can only be used when
the blender cap is attached to the motor unit.
Check whether the lid has proplerly locked into place
on the bowl with a click and whether the blender cap
has been properly assembled onto the motor unit
(see page 10). All functions except the blender can
only be used when the blender cap is attached to the
motor unit.
Take the lid off the bowl, unscrew the Click & Go
button by turning it anticlockwise and clean the lid in
the dishwasher. If there is still dirt in the Click & Go
button after this, clean the lid in the dishwasher a
second time. If you do not have a dishwasher you can
also let the lid soak in warm water with some
washing-up liquid for a while and then rinse it with
clean water.
Problem
The food processor
does not work.
Both the blender jar
and the food
processing bowl are
attached, but only the
blender works.
The appliance
suddenly stopped
running
The citrus press does
not work
The appliance cannot
be switched on.
Dirt has entered the
Click & Go button.
What can I do?
EN
|
Troubleshooting guide
Solution
Vérifiez si le couvercle a été correctement fixé sur le
bol (clic) et si le capuchon du mixeur a été vissé sur le
bloc moteur (voir page 10).Toutes les fonctions, sauf le
mixeur, peuvent être utilisées lorsque le capuchon est
fixé sur le bloc moteur.
Si le bol mixeur et le bol pour préparer les aliments
ont été correctement attachés, seul le mixeur
fonctionnera. Si vous voulez utiliser le bol pour
préparer les aliments, détachez le bol mixeur et
montez le capuchon sur le bloc moteur (voir page 10).
La coupure thermique de sécurité a probablement
coupé l'alimentation suite à une surchauffe.
1) Débranchez l'appareil. 2) Laissez l'appareil refroidir
pendant 60 minutes. 3) Branchez à nouveau l'appareil.
4) Remettez l'appareil en marche.
Vérifiez si vous avez vissé correctement le capuchon
sur le bloc moteur (voir page 10 les fonctions, sauf le
mixeur, peuvent être utilisées lorsque le capuchon est
fixé sur le bloc moteur.
Vérifiez si le couvercle a été correctement fixé sur le
bol (clic) et que le capuchon du mixeur ait été vissé
sur le bloc moteur (voir page 10).Toutes les fonctions,
sauf le mixeur, peuvent être utilisées lorsque le
capuchon est fixé sur le bloc moteur.
Retirez le couvercle, dévissez le bouton Click & Go en
tournant dans le sens inverse des aiguilles d'une
montre et nettoyez-le au lave-vaisselle. Si le bouton est
encore sale, nettoyez-le au lave-vaisselle pour la
seconde fois. Si vous n'avez pas de lave-vaisselle, faites
tremper le couvercle dans de l'eau chaude savonneuse
pendant quelque temps, puis rincez-le à l'eau claire.
Problème
Le robot de cuisine ne
fonctionne pas.
Le bol mixeur et le
bol pour préparer les
aliments sont attachés,
mais le mixeur seul
fonctionne.
L'appareil s'est arrêté
brusquement.
Le presse-agrumes ne
fonctionne pas.
L'appareil ne peut pas
être mis en marche.
Il y a des particules de
saleté dans le bouton
Click & Go. Que puis-
je faire?
FR
|
Guide de dépannage
Loading ...
Loading ...
Loading ...